Telemecanique SER Legacy Servo Motors
Telemecanique SER Legacy Servo Motors belongs to servo-motor hardware. The 11 technical references or proven groups below are separated by real differences in the complete order code.
Do not stop at the frame or family prefix. Confirm supply, I/O or interface role, feedback, software/firmware and connected-equipment class against the complete reference.
Shared family context: 4L7S winding/feedback variant; its nominal point belongs to the original Twin Line TL drive, while Lexium 32 migration uses the BSH/BMH table. 4L3S winding/feedback variant; its nominal point belongs to the original Twin Line TL drive, while Lexium 32 migration uses the BSH/BMH table. 110 mm flange; 4.2 Nm stall torque and 4 kg·cm² rotor inertia without brake (SER 31112 table). 4L5S winding/feedback variant; its nominal point belongs to the original Twin Line TL drive, while Lexium 32 migration uses the BSH/BMH table. 110 mm flange; 10 Nm stall torque and 11.3 kg·cm² rotor inertia without brake (SER 31122 table). 110 mm flange; 13.4 Nm stall torque and 15.5 kg·cm² rotor inertia without brake (SER 31127 table).
Motor differences
SER39A4L7S — 85 mm flange; 2.2 Nm stall torque and 1.6 kg·cm² rotor inertia without brake (SER 3910 table).
SER39B4L3S — 85 mm flange; 2.9 Nm stall torque and 2.4 kg·cm² rotor inertia without brake (SER 3913 table).
SER39C4L3S — 85 mm flange; 3.6 Nm stall torque and 3.2 kg·cm² rotor inertia without brake (SER 3916 table).
SER3BA4L3S —
SER3BA4L5S —
SER3BB4L3S — 110 mm flange; 6.6 Nm continuous and 12 Nm peak torque, 6,000 rpm mechanical speed. 4L3S winding/feedback variant; used with the original Twin Line TL drive, while Lexium 32 migration follows the BSH/BMH table.
SER3BB4L5S — 110 mm flange; 6.6 Nm stall torque and 8 kg·cm² rotor inertia without brake (SER 31117 table).
SER3BC4L5S —
SER3BC4L7S —
SER3BD4L5D — 4L5D winding/feedback variant; its nominal point belongs to the original Twin Line TL drive, while Lexium 32 migration uses the BSH/BMH table.
SER3BD4L7S —
Manual and related-product path: Telemecanique Servo Motor Manuals · Telemecanique Servo Motors · Schneider Electric BSH.
Before replacement or ordering, check the complete label, electrical class, connector/terminal arrangement and project backup together. A similar name or enclosure alone does not prove compatibility.