TECO PLC Cables and Peripheral Units

CPU, module and I/O

AP/TP03 cables, programming accessories, OP07/OP08/OP10 panels, supply and network modules serve different functions. A cable or panel is not a PLC CPU.

Compare the full AP or TP03 code with the target port, supply and expansion slot; keep TP03-PBUS and TP03-DNET protocols separate.

Model-code distinctions

Full label codes: AP-304EC · AP-340EC · AP-180USBC · TP-302PC · TP03-ULINK · TP03-102MC · TP-200EC · TP03-01SPS-A. Keep suffixes when selecting I/O and connections.

Full label codes: OP10 · TP03-PBUS · TP03-DNET · TP03-302PC · TP03-302MC · TP03-305MC · TP03-304EC · TP03-340EC. Keep suffixes when selecting I/O and connections.

Full label codes: JNSWPDA · OP07 · OP08. Keep suffixes when selecting I/O and connections.

Roles of nearby products

TECO PLC Cables and Peripheral Units: The PLC class is under TECO PLC Systems. TECO TP03 and TECO AP100 are different CPU or module options.

TECO PLC Cables and Peripheral Units: Check slot, I/O and programming cable by complete code for TECO AP200, TECO AP300 and TECO AP Digital I/O Modules.

Document scope for TECO PLC Cables and Peripheral Units is separated under TECO PLC and Module Documents; the full code and installed options determine selection.

Other TECO ranges