6ES7321-1EL00-0AA0
Siemens 6ES7321-1EL00-0AA0 — SM 321, 32 Digital Inputs, 120 V AC
6ES7321-1EL00-0AA0 is an SM 321 module with 32 digital inputs for the Siemens SIMATIC S7-300 family. It reads 120 V AC field signals and uses a 40-pin front connector. Within the S7-300 digital input range, it provides a high channel count for AC control and status signals.
Input voltage and signal characteristics
The rated input voltage is 120 V AC at 47–63 Hz. The module recognises 0–20 V AC as logic “0” and 74–132 V AC as logic “1”. It must not be selected as a 24 V DC or 230 V AC input module.
At rated input voltage, the maximum input delay is 15 ms for a “0” to “1” transition and 25 ms for a “1” to “0” transition. The delay is not parameterisable. For short-pulse detection, assess the signal duration together with the PLC scan time.
The module can read pushbuttons, limit switches and compatible proximity sensors that provide a suitable AC signal. For two-wire sensors, the maximum permissible quiescent current is 4 mA; off-state sensor leakage must allow the input to return to its inactive state.
Isolation, wiring and channel indicators
The 32 inputs form four isolated groups of 8 channels. Optocouplers isolate the field inputs from the backplane bus; channels within the same group are not individually isolated from one another. Wire the common terminals and channel groups according to the module-specific diagram.
A green status LED is provided for each input. The module has no hardware interrupts, diagnostic alarms or advanced diagnostic functions, and does not support isochronous operation. When investigating a missing signal, check the LED state, field voltage, common connections and PLC input image together.
Mounting temperature and simultaneously active inputs
With horizontal mounting, 32 inputs may be active up to 40 °C, reducing to 24 inputs up to 60 °C. With vertical mounting, 32 inputs may be active up to 40 °C. The 32-channel rating therefore does not mean that all inputs can remain active under every mounting and temperature condition.
System compatibility and model selection
Before replacement, compare the complete order number, S7-300 CPU, any ET 200M interface and STEP 7 hardware configuration in the PLC project. Check the 40-pin front connector and existing wiring separately. Whether the connector is included must be confirmed for the individual item.
For applications requiring 16 inputs and 120/230 V AC, 6ES7321-1FH00-0AA0 is a different option. Its channel count, voltage range and wiring differ, so it must not be treated as a direct replacement.
PDF files and technical documentation
Visit S7-300 PDF files and manuals for wiring diagrams and detailed module data. Check that the document covers SM 321; DI 32 × AC 120 V and 6ES7321-1EL00-0AA0.
Related topics and categories
S7-300 main page | Digital input modules | Digital output modules
Analog modules | Special and function modules | CPU modules
Used Siemens products | HMI operator panels | Second-hand main page
Manufacturer references
Siemens — 6ES7321-1EL00-0AA0 Data Sheet | Siemens — S7-300 Module Data