6ES7321-1BL80-0AA0

Siemens 6ES7321-1BL80-0AA0 — SM 321, 32 Digital Inputs, 24 V DC

6ES7321-1BL80-0AA0 is an SM 321 digital input module for extended environmental conditions in the Siemens SIMATIC S7-300 family. It provides 32 inputs for 24 V DC signals and uses a 40-pin front connector. Within the S7-300 digital input range, it is relevant to replacement work where the existing installation’s environmental requirements must also be retained.

Input characteristics and field wiring

The Siemens ST 70 · 2003 catalogue specifies 13–30 V DC for logic “1” and −30 to +5 V DC for logic “0”. Input delay at rated input voltage is 1.2–4.8 ms. The maximum permissible quiescent current for two-wire sensors is 1.5 mA.

The output circuits of connected inductive sensors, photoelectric sensors and other field sensors must match the input voltage and common-terminal arrangement. Pushbuttons and limit switches are read through a suitable field circuit. When selecting the 24 V DC power supply, account for total sensor consumption and voltage drop in the wiring.

Isolation and front connector

The inputs are arranged in two isolated groups of 16 channels, with optocoupler isolation from the backplane bus. Optical isolation does not mean that every channel is individually isolated from all other channels. Check the 40-pin front connector assignments, group commons and existing field wiring against the connection diagram.

Extended environmental conditions and active input count

The historical Siemens catalogue specifies 32 simultaneously active inputs up to 40 °C and 16 up to 60 °C. The 32-channel count therefore does not mean that every input can remain active at every temperature. Assess mounting orientation and cabinet temperature using the applicable module documentation.

Minimum operating temperature limits differ between Siemens catalogue editions. Confirm the exact limit using documentation applicable to the hardware version. An extended temperature rating does not mean that the module can be exposed directly to outdoor weather or water without suitable protection.

System compatibility and model identification

1BL80 must not be treated as identical to the standard 1BL00 model. Before replacement, check the full order number, hardware version, S7-300 CPU, any ET 200M interface and the hardware configuration in the PLC project. Matching the channel count and connector alone does not establish environmental suitability.

The extended-environment range also includes 6ES7321-1BH81-0AA0, a 16-input, 24 V DC version. Its channel count and connection arrangement differ, so it must not be treated as a direct replacement.

PDF files and technical documentation

Visit S7-300 PDF files and manuals for wiring and operating documentation. Use a historical catalogue or module document that specifically covers 1BL80; do not transfer specifications solely from a current 1BL00 or SIPLUS product page.

Related topics and categories

S7-300 main page  |  Digital input modules  |  Digital output modules

Analog modules  |  Special and function modules  |  CPU modules

Used Siemens products  |  HMI operator panels  |  Second-hand main page

OtomasyonAVM home

Manufacturer references

Siemens ST 70 · 2003 — SM 321 (4/34–4/36)  |  Siemens — S7-300 Modules for Extended Environmental Conditions