6ES7314-1AE02-0AB0
Siemens 6ES7314-1AE02-0AB0 – S7-300 CPU 314, 24 KB
Siemens 6ES7314-1AE02-0AB0 is a CPU 314 central processing unit with 24 KB of work memory in the SIMATIC S7-300 family. It uses a 24 V DC supply and an MPI interface for programming access. When selecting a replacement for an existing Siemens S7 PLC system, check the complete order number, hardware revision, program memory requirements, memory card and communication compatibility.
Work memory and processing time
The 24 KB work memory is used during program execution and should not be confused with memory-card capacity. Siemens’ product announcement covering this revision specifies a processing time of 0.3 ms per 1,000 instructions. This is not the total scan time of the machine program. Actual cycle time depends on the instructions used, program structure and communication load. Memory and speed specifications of newer S7-300 CPU models should not be assigned to this order number.
Battery, program backup and project compatibility
In this memory architecture, battery backup of RAM and program storage on the MC serve different purposes. Check battery condition, the program copy on the card and which data must survive a power interruption. A program stored on the card does not establish that every changing runtime value is saved in its latest state. Back up the STEP 7 project and accessible program data before replacement. Also check installed analog-module channel parameters, I/O addresses and communication settings.
Selecting a used CPU
Inspect the device label, battery compartment, memory-card slot, MPI connector and supply terminal. After backing up existing contents, assess online access, the diagnostic buffer, RUN/STOP transitions and restart behavior in a controlled test setup. The test report should identify the functions checked. A RUN LED alone does not prove that the correct program will be restored after a power interruption. Specify whether the battery, MC, connection accessories and program are included.
PDF files and technical references
For documentation, visit the S7-300 PDF files section. Manufacturer references: Siemens 6ES7314-1AE02-0AB0 product record and Siemens memory types and RAM-to-ROM copying document. Use information covering the 1AE02 version for technical selection.
Related topics and product groups
S7-300 CPU modules | S7-300 main page | S7-300 analog modules | Siemens S7 PLC products
Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home