6ES7313-6CG04-0AB0
6ES7313-6CG04-0AB0 Siemens CPU 313C-2 DP Compact PLC
6ES7313-6CG04-0AB0 is a CPU 313C-2 DP compact processor with 128 KB working memory, integrated digital I/O and a PROFIBUS DP interface in the Siemens SIMATIC S7-300 family. When selecting it for an existing PLC system, check the complete order number, I/O requirements, communication architecture, counter usage and memory card compatibility together.
Integrated digital inputs and outputs
The CPU provides 16 digital inputs rated at 24 V DC and 16 digital outputs. The transistor outputs have a rated current of 0.5 A per channel; also observe the total current limits for each output group. Suitable sensor and contact signals can be read directly through the integrated inputs.
No analog I/O is integrated. For analog measurement or reference signals, assess suitable S7-300 analog modules separately. The integrated I/O requires one 40-pin front connector.
High-speed counters and measurement functions
Three 30 kHz high-speed counters support pulse-counting applications. When connecting an encoder, check signal levels, counting mode and input assignments. Technology functions share the integrated I/O resources; do not treat a terminal assigned to different functions as several independent channels.
MPI and PROFIBUS DP communication
The X1 MPI interface supports up to 187.5 kbit/s, while the X2 PROFIBUS DP interface supports up to 12 Mbit/s. The DP interface can operate as a master or slave, according to project configuration. There is no integrated PROFINET interface; select the network connection to match the existing system.
Before replacing the CPU, match MPI/DP addresses, baud rates, connected stations and operator panel connections. Check that the STEP 7 hardware catalog supports the complete order number and the firmware version installed in the unit.
Memory, supply and installation
The 128 KB working memory cannot be expanded. A compatible SIMATIC Micro Memory Card (MMC) is required for operation. Verify memory card capacity and compatibility against the project; card capacity is separate from working memory. Back up the existing program and parameters before replacement.
The rated supply is 24 V DC, with an allowable range of 19.2–28.8 V DC. Include the CPU and field loads when sizing the 24 V DC power supply. Dimensions are 80 × 125 × 130 mm. For a used unit, confirm whether the MMC and front connector are included, and inspect the connectors and I/O operation.
PDF files and manuals
Use the S7-300 PDF files section for wiring, parameterization and technical documentation. Match order number 6ES7313-6CG04-0AB0 and the CPU 313C-2 DP designation in the manual.
Related topics and categories
S7-300 main page | Special and function modules | Analog and special signal modules
S7-300 CPU modules | Digital input modules | Digital output modules
S7-300 memory cards | Siemens S7 PLC range | Used Siemens products
HMI operator panels | Second-hand main page | OtomasyonAVM home