6ES7313-6BG04-0AB0

Siemens 6ES7313-6BG04-0AB0 – SIMATIC S7-300 CPU 313C-2 PtP

6ES7313-6BG04-0AB0 is a CPU 313C-2 PtP compact controller with 128 KB of work memory in the Siemens SIMATIC S7-300 family. Replacement selection should consider the complete order number, integrated I/O requirements, serial protocol, counter functions and project compatibility.

Integrated inputs and outputs: The CPU provides 16 digital inputs and 16 digital outputs. Outputs are rated at 24 V DC, 0.5 A nominal; check both channel and group limits when assessing loads. Suitable S7-300 digital input modules can be considered for additional inputs. There are no integrated analog channels, so analog measurement or control requires suitable analog modules.

MPI and PtP communication: The CPU offers MPI for programming and panel connections, plus a separate RS422/RS485 PtP interface for serial devices. Integrated serial drivers support ASCII and 3964(R). Check the partner device’s electrical interface, data format, communication settings and the program’s send/receive blocks together.

High-speed counters: There are three high-speed counters with a maximum counting frequency of 30 kHz. When connecting pulse-generating sensors or encoders, verify signal levels, counting mode and input assignments. Review standard input functions alongside channels allocated to counting.

Memory and project: A suitable SIMATIC Micro Memory Card is required for CPU operation. Back up the PLC project, hardware configuration and machine parameters before replacement. Check card capacity, contents and whether it is included. Verify that the STEP 7 version supports the CPU’s hardware/firmware version.

Supply and connections: The CPU uses 24 V DC and requires one 40-pole front connector for integrated I/O. Check the panel power supply, load supplies, connector condition and existing wire identification.

Buying a used CPU: Inspect the label, MMC slot, front connector and communication ports. As with other used automation products, confirm the individual unit’s test coverage. Assess digital channels, MPI communication, PtP data exchange and the required high-speed counters separately using suitable test equipment.

PDF files and manuals: Use the S7-300 files section for CPU, serial communication and technological-function documentation. Verify that the document covers 6ES7313-6BG04-0AB0.

Related topics and categories
S7-300 main page | S7-300 CPU modules | S7-300 digital input modules | S7-300 analog modules
PLCs and modules | DIN rail power supplies | S7-300 files | Second-hand main page | OtomasyonAVM home

Manufacturer reference: Siemens – 6ES7313-6BG04-0AB0 product information