6ES7313-5BE01-0AB0
Siemens 6ES7313-5BE01-0AB0 – S7-300 CPU 313C, 32 KB
Siemens 6ES7313-5BE01-0AB0 is a CPU 313C compact processor in the SIMATIC S7-300 family with 32 KB of work memory, 24 digital inputs and 16 digital outputs. It uses a 24 V DC supply and has an MPI interface. When selecting a replacement for an existing Siemens S7 PLC system, check the full model code, program memory requirements, I/O channels used, sensor wiring and project compatibility.
Analog inputs, outputs and Pt100 connection
The CPU provides 4 analog inputs, 2 analog outputs and an additional 1 Pt100 input. Configured measuring modes, ranges and scaling must match the field devices. Connect the dedicated Pt100 temperature sensor input according to the applicable terminal diagram. Selecting a replacement solely by digital channel count can overlook analog functions used by the machine.
High-speed counters and MPI access
Three 30 kHz high-speed counters support counting applications with suitable pulse sources. When choosing an encoder, check electrical output compatibility, pulse frequency and counting mode together. 30 kHz is not the PLC program scan frequency. Programming and online inspection require an MPI-compatible interface; PG/PC settings and the station address must match the existing project.
MMC and front connectors
A SIMATIC Micro Memory Card (MMC) is required for operation, and field wiring requires two 40-pin front connectors. The MMC provides load memory; a larger card does not increase the 32 KB work memory. Check card compatibility and capacity, and clarify whether both front connectors are included. Back up the STEP 7 project, program and required operating data before replacing the CPU.
Selecting a used CPU
Assess the digital inputs and outputs, analog channels, Pt100 input and required high-speed counters separately. Analog test descriptions should identify the reference signal and measuring range; check Pt100 operation with a suitable sensor or simulator. Inspect the label, firmware version, MMC slot, MPI port and connector contacts. A RUN LED does not establish the accuracy of analog measurements or outputs. State the test scope and whether the card and accessories are included.
PDF files and technical references
For documentation, visit the S7-300 PDF files section. Manufacturer references: Siemens 6ES7313-5BE01-0AB0 product record and Siemens S7-300 memory concept document. Base wiring and parameter selection on information covering the 5BE01 version.
Related topics and product groups
S7-300 CPU modules | S7-300 main page | S7-300 analog modules | Siemens S7 PLC products
Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home