6ES7307-1KA00-0AA0

6ES7307-1KA00-0AA0 Siemens PS 307 24 V DC 10 A Power Supply

6ES7307-1KA00-0AA0 is a PS 307 stabilized power supply with a 120/230 V AC input and 24 V DC, 10 A output for Siemens SIMATIC S7-300 systems. For an existing PLC cabinet, assess the complete order number, mains voltage, total load current, mounting space and connection layout together.

AC input and voltage selection

The unit connects to a single-phase 120/230 V AC, 50/60 Hz supply. This revision has an input voltage selector. Check that its position matches the mains before energizing the unit. Incoming circuit protection, cable size and protective earthing must follow the device manual and cabinet design.

24 V DC output and load calculation

10 A is the total rated output current; multiple output terminals do not increase that capacity. 24 V × 10 A = 240 W rated output power. Calculate the simultaneous demand of the CPU, modules, sensors and other 24 V loads, including startup currents and planned additions.

Protection and parallel connection

Electronic short-circuit protection is provided, with automatic output voltage recovery after the fault is removed. This model does not support parallel connection to increase output current. For additional capacity, select a suitable supply using the total load calculation or design separate supply groups for the loads.

Dimensions and cabinet layout

Width × height × depth: 200 × 125 × 120 mm. Approximate weight is 1.2 kg. When replacing the power supply, check mounting space, terminal access, cable allowance and ventilation clearances. Another revision with the same output rating may have different physical dimensions.

Used-unit assessment

Inspect the label and order number, voltage selector, terminals and signs of overheating on the housing. A 24 V reading without a load is insufficient on its own. Assess output stability, ripple, heating and restart behavior under the expected operating load. Confirm test conditions and included accessories before purchase.

PDF files and manuals

Use the S7-300 PDF files section for technical documentation. Match the PS 307; 10 A heading and complete order number 6ES7307-1KA00-0AA0 when checking wiring and specifications.

Related topics and categories

S7-300 main page  |  Special and function modules  |  Analog and special signal modules

S7-300 CPU modules  |  Digital input modules  |  Digital output modules

S7-300 memory cards  |  Siemens S7 PLC range  |  Used Siemens products

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home