6ES7 193-7DB20-0AA0
Siemens Main Menu › SIMATIC S7 › ET 200 Modules
Siemens 6ES7 193-7DB20-0AA0 — ET 200iSP TM-PS-B UC Terminal Module
6ES7 193-7DB20-0AA0 is the TM-PS-B UC terminal module used to hold the redundant power supply in an ET 200iSP station within the Siemens ET 200 family. It is installed in addition to TM-PS-A and provides the mounting and connection base for the second power module. It is not a power supply by itself.
When reviewing the distributed I/O system architecture, distinguish the electronic module from its wiring base. Among ET 200 terminal blocks, this model is a dedicated power-supply terminal.
Construction and compatible power modules
Connection: Screw terminals, with three terminals for the supply voltage and equipotential bonding. The terminal module can be prewired before the power module is fitted. Dimensions: 60 × 190 × 52 mm (width × height × depth, terminal module only).
Compatible ET 200 power supply modules include 6ES7138-7EC00-0AA0, PS 120/230 V AC, and 6ES7138-7EA01-0AA0, PS 24 V DC. Siemens' current system manual specifies product version 7 or later for the 24 V DC power module used with this terminal. Check the version on the power module label as well as its order number.
The references to 120/230 V AC and 24 V DC describe the supply options of the fitted power module. They do not mean that either voltage can be connected without checking the selected PS and its wiring diagram. Keep the role of power distribution components separate from that of the electronic power supply.
How TM-PS-A differs from TM-PS-B
6ES7193-7DA20-0AA0, TM-PS-A UC, holds the primary power module. 6ES7193-7DB20-0AA0, TM-PS-B UC, is added for the redundant power module. These order numbers should not be treated as interchangeable choices for the same position. A redundant supply arrangement also differs from an uninterruptible power supply system: this terminal provides no energy storage or facility-wide backup power.
Five checks before selection or replacement
1. System and order number: Confirm that the station is ET 200iSP and that the required part is the 7DB20 redundant power terminal. Do not select connection modules and wiring bases from other ET 200 systems simply because their names look similar.
2. Power module version: Read both the order number and product version, particularly on PS 24 V DC modules. Physical resemblance alone is not enough to establish replacement compatibility.
3. Supply and wiring: Match the PS module's AC/DC supply type, wiring diagram and equipotential bonding requirements. Selecting external industrial power supplies is a separate task from checking the terminal fitted inside the station.
4. Mechanical condition: Inspect terminal screws, contacts, coding parts and rail attachment. A cracked housing, heat damage or altered coding must not be overlooked merely because the power module fits.
5. Scope of delivery: The terminal and the plug-in power supply are separate components. For a used item, request a readable label photograph and a clear description of its condition and included parts.
Station function and maintenance
TM-PS-B UC does not run a user program and is not a communication interface. Network connectivity is handled by the appropriate ET 200 communication interface modules. Field signals are handled by digital input modules, analog input modules and digital output modules. These category links do not imply that every listed module is compatible with ET 200iSP.
Editor's Note
The two common selection errors are mistaking this terminal for the power supply and treating TM-PS-A and TM-PS-B as interchangeable. Check the terminal order number, PS order number and PS product version together. Suitability for hazardous-area applications depends on the complete ET 200iSP installation and its specified conditions. Supply wiring at the terminal must be carried out with the power off; permission to replace a power module under specified conditions does not imply permission to disconnect its supply wiring while energized.
PDF manuals and wiring diagrams: Visit Siemens ET 200 user manuals and PDF documents for ET 200iSP documentation. Relevant sections cover TM-PS-A / TM-PS-B terminal modules, power supply compatibility and supply wiring.
Related Topics
Power Supply Modules · Terminal Blocks · Connection Modules
Otomasyon AVM
Siemens Main Menu · SIMATIC S7 · ET 200 Modules · ET 200 PDF Manuals · PLC and HMI