6ES7 132-7GD20-0AB0

Siemens automation › SIMATIC S7 › Siemens ET 200 › 6ES7132-7GD20-0AB0

Siemens 6ES7 132-7GD20-0AB0 — ET 200iSP 4 DO, 17.4 V DC / 40 mA, L Shutdown

6ES7 132-7GD20-0AB0 is a four-channel electronic output module for ET 200iSP stations in the Siemens ET 200 family. Its designation is 4 DO DC17.4V/40mA, SHUT DOWN “L”. It controls suitable intrinsically safe valve and actuator circuits. When comparing ET 200 digital output modules, check both the output characteristics and shutdown logic.

Understanding the voltage and current ratings

17.4 V DC is the no-load output voltage. For GD20, Siemens specifies 150 Ω internal resistance and a 40 mA operating point per channel; the manual gives at least 11.0 V at 40 mA at the characteristic corner point. Assess valve pickup voltage, coil current and cable voltage drop together.

Outputs: 4. Additional input: one intrinsically safe L-shutdown input. Short-circuit protection: provided. Diagnostics: wire break and short circuit. Dimensions: 30 × 129 × 136.5 mm. Siemens also specifies an 80 mA option using permitted parallel channel pairs on the same module; verify the wiring and Ex suitability against the documented arrangement.

How L shutdown works

A low-active intrinsically safe shutdown signal switches off all four outputs together without changing the PLC output process image. H-shutdown versions use a different active level. When reviewing ET 200 connection modules and field wiring, identify the shutdown circuit separately from the output loads.

Applications without a shutdown signal require the corresponding parameter setting specified by Siemens. Do not disable an existing shutdown function merely to clear a fault; establish its intended role in the project first.

Terminal and interface compatibility

Siemens connection documentation lists the TM-IM/EM and TM-EM/EM terminal families for this series. When selecting ET 200 terminal blocks, verify the station position, complete base code and connection type. Include the ET 200 power supply modules and power distribution components in the station load assessment.

GD20 and GD21 do not have identical interface compatibility. The Siemens manual dated 11/2022 lists 6ES7132-7GD20-0AB0 as incompatible with IM 152-1PN, while 6ES7132-7GD21-0AB0 is listed as compatible. Account for this when moving between PROFIBUS and PROFINET interfaces. Do not redesign the ET 200 station configuration solely around the “17.4 V / 40 mA” designation.

Monitoring valve-position feedback through ET 200 digital input modules alongside pressure or level readings from ET 200 analog input modules helps establish whether an output command produces the intended field response.

Five checks before selection or replacement

1. Exact code: Assess GD20, GD21 and RD variants separately. Similar voltage and current ratings do not establish interchangeability.

2. Load matching: Compare valve pickup and holding requirements with the output characteristic, including cable voltage drop.

3. Shutdown circuit: Verify the L-signal source, parameter setting and effect on all four channels against the project documentation.

4. Ex circuit assessment: Check the module, field device and cable certification data together. Functional compatibility alone does not establish intrinsic safety.

5. Commissioning: Test CPU STOP response, channel diagnostics, shutdown operation and actual actuator response under controlled conditions.

Editor's note: If all four outputs stop working, check the common L-shutdown circuit before investigating four separate valve failures. An active output command on the PLC screen does not by itself prove that the field output is active.

Manuals and PDF documents

On the Siemens ET 200 PDF and user manuals page, consult ET 200iSP, A5E00247483-07, section 12.2 and the GD20 data sheet. For migration to IM 152-1PN, also check the compatibility table in A5E00247483-AK, section 12.1.2.

Related topics

Power and connections: Power supply modules · Terminal blocks · Connection modules · Power distribution modules

Explore the station: About ET 200 · Communication interfaces · ET 200 manuals

Otomasyon AVM | Siemens:
Siemens main menu  |  Siemens S7 PLC  |  SIMATIC S7  |  ET 200 modules