6ES7 151-7FA20-0AB0

Siemens 6ES7 151-7FA20-0AB0 ET 200S IM151-7 F-CPU

Siemens 6ES7 151-7FA20-0AB0 is the ET 200S IM151-7 F-CPU in the SIMATIC ET 200 family. It has 128 KB of work memory and an integrated PROFIBUS DP interface. The CPU supports standard and safety programs. Its order number without spaces is 6ES7151-7FA20-0AB0.

CPU architecture, memory and MMC

64 KB of work memory is retentive, but current F-DB values are not retained through a power cycle or restart. Load memory is provided by a SIMATIC Micro Memory Card (MMC), which must be inserted for operation. Check card capacity, project contents and hardware version together. The Siemens ET 200 overview provides general background on the system family.

PROFIBUS connection and station compatibility

The integrated interface uses a 9-pin female D-sub connector; the Siemens catalogue identifies it for DP slave operation. When comparing PROFIBUS and PROFINET interfaces, use the connection specified for this exact order number. Before maintenance, compare the PROFIBUS address, exchanged data areas, bus termination and hardware configuration of the higher-level controller.

Check the complete order numbers and versions of the station’s digital input, digital output and analog input modules. Include power supply modules, power distribution modules, terminal blocks and connection modules in the station assessment. An item appearing under the ET 200 heading does not establish compatibility with this CPU.

STEP 7 and the safety program

For hardware version 01 onwards and firmware V2.6 onwards, the Siemens product information lists STEP 7 V5.4 SP3 or later as one supported software route. Safety applications additionally require S7 Distributed Safety V5.2 SP2 or later. Verify the actual software and operating system combination against the original engineering environment and manufacturer compatibility records.

For projects using PROFIsafe and safety modules, review the F-addresses, safety program signature and validation records together. A CPU reaching RUN does not establish that the machine’s safety functions have been validated. After replacement, the relevant safety functions should undergo acceptance testing by authorised site personnel following the project procedure.

Maintenance, replacement and version checks

Before intervention, retain the existing project, hardware configuration and diagnostic buffer records. Compare the CPU nameplate, firmware version, MMC and module order within the station. Investigate the power supply, connector, cable and addressing separately when diagnosing communication faults. Establish the backup and project access arrangements before a memory reset or firmware change.

The Siemens catalogue marks this order number as PM500 and lists 6ES7151-7FA21-0AB0 as its successor. This does not establish unconditional interchangeability in every project. Assess memory requirements, software, hardware and safety project compatibility before replacement.

PDF files and user manuals

For PDF and manual links, visit the Siemens ET 200 user manuals page. Assess this model using both IM151-7 F-CPU Product Information A5E01170612-02 and the IM151-7 CPU Manual A5E00058783-04. Check that the documentation covers the complete order number, hardware version and installed firmware.

Related topics

To compare station options, explore functional and safety modules, counter modules, positioning modules, special input modules, special output modules, other network interfaces and additional modules. These links provide general information and category navigation; verify module compatibility using the complete order number.

ET 200 navigation

Simatic ET200 | About Siemens ET200 PLC | ET200 additional modules | ET200 Analog Input Modules

ET200 Connection Modules | ET200 Counter Modules | ET200 Digital input | ET200 Digital Output Modules

ET200 Functional and Safety Modules | ET200 Other Network Interface Modules | ET200 Positioning Modules | ET200 Power Distribution Modules

ET200 Power Supply Modules | ET200 PROFIBUS and PROFINET | ET200 Safety Modules | ET200 Special Input Modules

ET200 Special Output Modules | ET200 Terminal Blocks | Siemens ET200 ProfiSAFE | Siemens ET200 User Manuals

Technical sources: Siemens Industry Mall — 6ES7151-7FA20-0AB0; A5E01170612-02 (06/2007); A5E00058783-04 (11/2003). PDF and manual links: Siemens ET200 User Manuals.