6ES7314-5AE10-0AB0

Siemens 6ES7314-5AE10-0AB0 – CPU 314 IFM Compact PLC

6ES7314-5AE10-0AB0 is the SIMATIC S7-300 CPU 314 IFM compact processor with an MC memory card slot. It includes 32 KB of work memory, integrated digital/analog I/O, a 24 V DC supply connection and connections for two 40-pin front connectors. When selecting from the S7-300 CPU range, compare the complete order code, memory architecture, onboard I/O, communications and program compatibility.

Integrated inputs and outputs

The CPU provides 16 standard digital inputs and 16 digital outputs, plus 4 analog inputs and 1 analog output. It also has four special inputs at I126.0–I126.3 for counting, frequency measurement, positioning or interrupt functions. The special inputs support frequencies up to 10 kHz.

Check the assignments of the standard digital inputs and the special-function inputs separately in the project. The onboard analog channels have nominal ranges of ±10 V and ±20 mA with 11 bits plus sign resolution. Compare the existing signals and channel requirements before selecting additional analog modules.

MC slot and memory architecture

The 5AE10 version has an MC slot, unlike CPU 314 IFM versions without a card slot. Its Memory Card (MC) must be distinguished from the Micro Memory Card (MMC) used by later S7-300 models. Load memory and work memory serve different purposes; fitting a larger card does not increase the CPU's 32 KB work memory.

Before replacing a CPU, prepare a backup of the program, hardware configuration and required data blocks. Check the card's contents and suitability for the project as well as its presence. Review battery condition and the data that must survive a power interruption. A program found on a used CPU should not be assumed to match the machine where it will be installed.

MPI communications and system compatibility

The integrated communication interface is MPI. The CPU has no onboard PROFINET/Ethernet or separate PROFIBUS-DP port. Verify MPI support when selecting a programming adapter or HMI panel. Additional communication requirements need a compatible CP module and a check against the CPU version.

Review the cabinet 24 V DC power supply and field wiring against the CPU and connected loads. Matching the CPU family name alone is insufficient: confirm the 5AE10 order code, hardware version and connection arrangement against the label and project documentation.

Assessing a used CPU

When comparing used Siemens products, include MPI communication, RUN/STOP transitions and digital/analog I/O in the test scope. Test special-input functions and memory card access if the application requires them. An illuminated RUN LED alone does not validate every part of the hardware.

Before ordering, confirm whether the front connectors, MC card and battery are included. Establish the actual condition and documented test results for the individual CPU, and retain these records with the intended installation's project backup.

Related topics and product groups

S7-300 overview  |  S7-300 CPU modules  |  Digital input modules

Digital output modules  |  Function modules  |  Analog module range

Used Siemens products  |  Used equipment overview  |  OtomasyonAVM home

Manufacturer references

Siemens – 6ES7314-5AE10-0AB0 product data sheet (archived copy)  |  Siemens – CPU 312 IFM–318-2 DP technical specifications manual