6ES7314-1AF10-0AB0

Siemens 6ES7314-1AF10-0AB0 – S7-300 CPU 314

6ES7314-1AF10-0AB0 is a SIMATIC S7-300 CPU 314 central processing unit with 48 KB of work memory, an MPI communication interface and a 24 V DC supply connection. A SIMATIC Micro Memory Card (MMC) is required for operation. When selecting from the S7-300 CPU range, check the complete order code, memory requirements, communications, module arrangement and existing program.

CPU 314 and the I/O arrangement

This model has no integrated digital or analog I/O. Field signals are handled through suitable digital input modules, digital output modules and analog modules. The onboard channel specifications of CPU 314 IFM or CPU 314C models do not apply to this CPU.

Physical fit alone does not establish compatibility when replacing a CPU. Match the module order codes, slot sequence, I/O addresses and parameters to the existing hardware configuration. Assess the cabinet 24 V DC power supply against the requirements of the CPU, connected modules and field loads.

48 KB memory and the required MMC

The 48 KB work memory cannot be expanded. The MMC provides load memory, with a supported maximum capacity of 8 MB. A larger MMC does not increase the CPU's work memory. Check the work memory needed by the program and its data separately from card capacity.

For a used unit, establish whether the MMC is included, identify its type and confirm that the CPU can read it. Do not assume that a program already on the card matches the intended machine. Back up the program, hardware configuration and required data blocks before changing or erasing the card or downloading a replacement program.

MPI connectivity and program compatibility

The RS-485-based MPI port supports a maximum communication speed of 187.5 kbit/s. There is no integrated PROFIBUS-DP or PROFINET/Ethernet interface. Verify the protocol support of the programming adapter and HMI panel; an RS-485 connection alone does not establish MPI compatibility.

Siemens technical data specifies STEP 7 V5.1 SP4 or later for this version. Compare the project's CPU hardware and firmware versions with the hardware catalog of the intended engineering software. If Ethernet or another network is needed, assess the appropriate CP module and project compatibility separately.

Selecting a used CPU

When assessing this CPU among used Siemens products, check online MPI access, MMC reading, RUN/STOP transitions and diagnostic records. Evaluate program execution and communication with connected I/O modules in a suitable test setup. Powering up alone does not establish that the CPU will operate correctly in the application.

Before ordering, confirm the label photograph, physical condition, test scope and delivery contents. Ask whether items such as the MMC, power supply plug and bus connector are included, and identify any additional accessories required by the existing system.

Related topics and product groups

S7-300 overview  |  S7-300 CPU modules  |  Digital input modules

Digital output modules  |  Function modules  |  Analog module range

Used Siemens products  |  Used equipment overview  |  OtomasyonAVM home

Manufacturer references

Siemens – 6ES7314-1AF10-0AB0 technical data sheet (archived copy)  |  Siemens – CPU 31xC and CPU 31x technical specifications manual