6ES7314-1AE03-0AB0
Siemens 6ES7314-1AE03-0AB0 — S7-300 CPU 314, 24 kB
6ES7314-1AE03-0AB0 is a S7-300 CPU 314 central processing unit in the Siemens SIMATIC S7 PLC family, with 24 kB of work memory, a 24 V DC supply and an MPI interface. When selecting an S7-300 CPU module for an existing installation, check the complete order number, program memory requirements and hardware configuration together.
Memory architecture and program backup
This CPU belongs to the S7-300 generation using the classic SIMATIC Memory Card (MC). Card selection must account for the difference between MC and Micro Memory Card (MMC); the MMC requirements of later CPU 314 versions should not be applied to this model.
Work memory, load memory and program retention during power loss require separate consideration. Check the installed card type and contents, the backup battery and the available program backup. Confirm whether the card and other PLC accessories are included in the delivery.
MPI communication
The MPI connection supports communication with compatible programming devices and operator panels. Match the MPI address, transmission rate and programming adapter settings to the existing project when establishing a connection.
The CPU has no integrated PROFIBUS DP or PROFINET interface. Any communication processor proposed for additional networking must be checked for compatibility with this CPU order number and hardware version. For connections to Siemens ET200 stations, select the network protocol and required master interface together.
Field inputs and outputs
This standard CPU 314 has no integrated digital or analog field I/O. Field signals connect through suitable S7-300 signal modules. When selecting S7-300 analog modules, check the channel count, measurement range and signal type. During CPU replacement, also verify the existing I/O addressing.
Power supply and processing performance
The CPU has a nominal supply voltage of 24 V DC. Power supply selection should cover the requirements of the CPU, modules and field loads.
Siemens lists a processing performance of 0.3 ms per 1,000 statements in the product announcement covering this order number. This figure is not the complete application scan time; program structure, communication and the instructions used affect the actual scan time.
Programming and CPU replacement
Compare the STEP 7 hardware configuration with the CPU label and firmware version. Before replacement, record the program backup, data blocks, communication settings and installed modules. The CPU 314 name alone does not establish direct interchangeability between different order numbers.
PDF files and technical reference
Browse the S7-300 PDF files for related documentation. Manufacturer reference for this model's memory and processing performance: Siemens CPU firmware announcement — 4354238.
Related topics and product groups
S7-300 CPU modules · Siemens S7 PLC products · PLCs and accessories · S7-300 analog modules · Siemens ET200 · Used PLC power supplies · Used products · OtomasyonAVM home