6ES7313-1AD02-0AB0
6ES7313-1AD02-0AB0 Siemens SIMATIC S7-300 CPU 313
6ES7313-1AD02-0AB0 is a standard CPU 313 processor with 12 KB working memory and a 24 V DC supply in the Siemens SIMATIC S7-300 family. When selecting it for maintenance or processor replacement in an existing PLC system, check the complete order number, hardware revision and working STEP 7 project together.
Modular architecture and field connections
There are no integrated digital or analog field I/O channels. Inputs and outputs are provided through separate signal modules. Match the order, addresses and parameters of the installed digital input, digital output and analog modules to the existing hardware configuration.
MPI communication
The MPI interface supports communication with compatible programming devices and operator panels. Siemens documents 19.2 kbit/s MPI configuration for 1AD02 hardware version 01 onwards with STEP 7 V4.02 or later. Check the addresses and baud rates of the CPU, panel and programming adapter together when establishing a connection.
Under the same revision conditions, CP/FM module MPI addresses can be configured in STEP 7. When replacing the processor in an older station, record the communication module and panel settings alongside the CPU address and include them in the project backup.
Working memory and memory card selection
The 12 KB working memory must be considered when assessing the user program and data requirements. Check actual project memory usage in STEP 7. When selecting a memory card, match its full order number to the CPU revision; card types and capacity limits vary between S7-300 generations.
Supply and used-unit checks
The rated supply is 24 V DC. Size the power supply for the CPU, expansion modules and field loads. On a used unit, inspect the label, MPI socket, module connections, status LEDs and operating mode switch. Check the battery condition, program backup and power-loss data retention arrangement; separately confirm which accessories are included.
PDF files and manuals
Use the S7-300 PDF files section for wiring, configuration and maintenance documents. Check that the manual covers 6ES7313-1AD02-0AB0, and verify which hardware revision is described by each CPU 313 specification table.
Related topics and categories
S7-300 main page | Special and function modules | Analog and special signal modules
S7-300 CPU modules | Digital input modules | Digital output modules
S7-300 memory cards | Siemens S7 PLC range | Used Siemens products
HMI operator panels | Second-hand main page | OtomasyonAVM home