6ES7312-5AC81-0AB0

Siemens 6ES7312-5AC81-0AB0 – CPU 312 IFM Outdoor

6ES7312-5AC81-0AB0 is the Outdoor version of the Siemens SIMATIC S7-300 CPU 312 IFM, designed for extended environmental conditions. It provides 6 KB of work memory, 10 digital inputs and 6 digital outputs and operates from 24 V DC. MPI communication and integrated counting/frequency measurement are included. When selecting S7-300 CPU modules, check the complete order number, ambient temperature, memory requirements, I/O connections and project compatibility.

Outdoor version and operating environment

Siemens identifies 5AC81 as the Outdoor counterpart of the standard 5AC01 version. The Outdoor series permits operation at −25 to +60 °C with horizontal installation and −25 to +40 °C with vertical installation. Enclosure protection, condensation conditions, ventilation and the temperature ratings of other installed modules must also be considered.

When replacing a CPU in an installation operating at low temperatures, retaining the appropriate Outdoor order number matters. A shared CPU family name or similar appearance does not establish equal environmental suitability. The selected 24 V DC power supply must also suit the operating conditions.

Integrated digital I/O and special inputs

The CPU has 24 V DC digital inputs and digital outputs rated at 0.5 A per channel. Integrated I/O, supply and ground connections use one 20-pin front connector. Check output loads and total current limits. Suitable digital input modules and digital output modules can be considered for additional channels.

Inputs I124.6, I124.7, I125.0 and I125.1 serve special functions according to the configuration; these four channels are included in the total of 10 inputs. Integrated functions include counting and frequency measurement up to 10 kHz. Match the signal level, input function and terminal assignment to the project when choosing sensors.

There are no integrated analog inputs or outputs. Applications requiring analog sensors or control signals need suitable S7-300 analog modules, with both CPU compatibility and environmental ratings checked.

Memory architecture and MPI communication

The 6 KB work memory cannot be expanded. The CPU 312 IFM uses integrated nonvolatile FEPROM load memory for the program and has no external MC/MMC slot or backup battery. Saving the program to nonvolatile memory and retaining changing operating data are separate matters. Back up the program and review retentivity settings before replacement.

The MPI interface connects programming equipment and compatible HMI panels. There is no integrated PROFIBUS-DP or PROFINET/Ethernet interface. Verify the MPI address, connection settings and programming adapter compatibility in the existing installation.

Checks when buying a used CPU

When assessing this CPU among used Siemens products, include MPI access, RUN/STOP transitions, all 10 inputs and all 6 outputs in the test scope. Test the required counting/frequency measurement function with a suitable signal source. After backing up the program, a controlled power cycle should confirm program preservation and the expected startup behaviour.

Review the label photograph, signs of corrosion, connector condition and test results before ordering. A functional test at room temperature does not establish that low-temperature operation has also been verified. Confirm whether the 20-pin front connector, mode selector key and bus connector are included.

Related topics and product groups

S7-300 overview  |  S7-300 CPU modules  |  Digital input modules

Digital output modules  |  Function modules  |  Analog module range

Used Siemens products  |  Used equipment overview  |  OtomasyonAVM home

Manufacturer references

Siemens – S7-300 module specifications and Outdoor mapping (archive copy)  |  Siemens – ST 70 S7-300 catalogue (archive copy)  |  Siemens – CPU 312 IFM–318-2 DP installation manual