6ES7312-1AD10-0AB0
Siemens 6ES7312-1AD10-0AB0 – S7-300 CPU 312, 16 KB
Siemens 6ES7312-1AD10-0AB0 is a CPU 312 central processing unit in the SIMATIC S7-300 family with 16 KB of work memory and an MPI interface. It uses a 24 V DC supply and requires a SIMATIC Micro Memory Card (MMC). When replacing a CPU in a Siemens S7 PLC system, check the order code, firmware, program memory requirements, module arrangement and communication connection.
16 KB work memory and MMC
The MMC provides load memory for the program and configuration. Verify compatibility, capacity and whether the card is included. Check that the existing program fits the CPU. When considering other S7-300 CPU modules for greater memory capacity, also verify hardware configuration and program compatibility.
Single-rack configuration and separate I/O
The CPU supports a single-tier configuration with up to 8 modules. No digital or analog field I/O is integrated; separate modules provide these functions. Select suitable S7-300 analog modules for analog measurement or control. Match module order codes, addresses, signal types and backplane connections to the project. Account for integrated I/O differences when considering replacement of a CPU 312C or CPU 312 IFM.
MPI and STEP 7 compatibility
Programming and online checks require an MPI-compatible interface. Verify PG/PC settings and the station address. Siemens specifies STEP 7 V5.1 + SP4 or later for this model; also check firmware and hardware catalog compatibility. Back up the project, program blocks and required operating data before replacement.
Selecting a used CPU
Inspect the 6ES7312-1AD10-0AB0 label, MMC slot, MPI port, supply terminal and bus contacts. A controlled test should assess online access, program loading, RUN/STOP transitions and communication with connected modules. A RUN LED alone does not verify every system function. Record the MMC, firmware and modules used, and identify included connection parts and accessories.
PDF files and technical references
Visit the S7-300 PDF files section. Manufacturer references: Siemens 6ES7312-1AD10-0AB0 product record and Siemens STEP 7 V5.1 SP4 supported modules document. Use technical information covering the 1AD10 version.
Related topics and product groups
S7-300 CPU modules | S7-300 main page | S7-300 analog modules | Siemens S7 PLC products
Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home