6ES7334-0CE00-0AA0

Siemens 6ES7334-0CE00-0AA0 – SM 334 Analog Input/Output Module

6ES7334-0CE00-0AA0 is an SM 334 analog input/output module in the Siemens SIMATIC S7-300 family. It combines 4 analog inputs and 2 analog outputs with 8-bit resolution for both input and output conversion. Its non-isolated design provides analog measurement and command signals within one module for existing installations.

Selection criteria: Consider resolution, signal range, isolation and CPU compatibility alongside channel count. 8-bit resolution does not provide the same measurement granularity as a 12-bit or 16-bit module. Applications requiring finer measurement or control should be assessed against suitable S7-300 analog modules. Converting the value to a wider data type in the PLC program does not increase hardware resolution.

Field connections: When matching pressure sensors, temperature measurement systems or other transmitters, check the voltage/current signal type, measurement range and common reference connection. Potential differences and shielding arrangements matter with a non-isolated module. Assess the panel power supply and field-device supplies against the wiring diagram for this particular module.

0CE00 versus 0CE01: The complete order number here is 6ES7334-0CE00-0AA0; it must be distinguished from 6ES7334-0CE01-0AA0. The 0CE00 version is not suitable for use with active backplane bus modules. Replacement-during-operation features associated with the later version must not be assumed for this model. Siemens documents restrictions involving older modules and newer S7-300 CPUs, so PLC/CPU selection must account for the complete order number and hardware version.

Buying a used module: Check the device label, hardware version, terminal condition and included accessories. Testing all four inputs and both outputs individually provides more useful evidence than CPU recognition alone. Assess inputs at several measurement points and verify output stability under a suitable load. As with other used automation devices, confirm the test coverage for the individual unit.

PDF files and manuals: Use the S7-300 files section for wiring, signal ranges and system compatibility. Check that the document covers the 6ES7334-0CE00-0AA0 order number and the hardware version of the device.

Related topics and categories
S7-300 main page | S7-300 analog modules | PLCs and modules | Sensors
Pressure sensors | Temperature sensors | DIN rail power supplies | Second-hand main page | OtomasyonAVM home

Manufacturer reference: Siemens – S7-300 CPU and legacy module compatibility notice