6ES7332-5HF00-0AB0
Siemens 6ES7332-5HF00-0AB0 — SM 332 8-Channel Analog Output Module
6ES7332-5HF00-0AB0 is an S7-300 SM 332 module with 8 analog outputs for Siemens SIMATIC S7 PLC systems. Each channel can be configured for voltage or current output. With 11/12-bit resolution and a 40-pin front connector, it is an option within the S7-300 analog module range for applications requiring several analog references from one module.
Eight channels and output ranges
Supported voltage ranges are 0–10 V, 1–5 V and ±10 V; current ranges are 0–20 mA, 4–20 mA and ±20 mA. All eight channels are individually configurable, and unused outputs can be disabled. The STEP 7 channel settings, field wiring and receiving device must match the selected signal range.
Applications include speed commands to variable frequency drives, references to servo systems and process commands to actuators with compatible analog inputs. Voltage outputs require a load resistance of at least 1 kΩ; the general specification for current outputs allows up to 500 Ω. Check the receiving input and connection wiring together.
Understanding the 11/12-bit specification
Resolution depends on the selected range: 12 bits for 0–10 V and 0–20 mA, and 11 bits plus sign for ±10 V, ±20 mA, 1–5 V and 4–20 mA. Use the specification for the actual range when assessing suitability. Resolution and overall output accuracy are different characteristics; the application's accuracy requirements must also be considered.
Supply, connection and isolation
The module uses a nominal 24 V DC load supply and a 40-pin front connector. Outputs are galvanically isolated from the backplane bus and load supply, but there is no galvanic isolation between output channels. Applications requiring independent channel isolation may need suitable isolating analog signal converters.
Diagnostics and CPU STOP behaviour
Programmable diagnostics, diagnostic interrupts and parameter changes during RUN are supported. Isochronous operation is not supported. On CPU STOP, outputs can be configured to produce zero voltage/current or hold the last value. Check this setting against the receiving device's response to the resulting signal.
Wire-break monitoring applies to current outputs, while short-circuit monitoring applies to voltage outputs. Wire-break detection is unreliable near zero current in the 0–20 mA and ±20 mA ranges. Configure diagnostics to suit the output type and operating range.
Replacement and compatibility
Before replacement, compare the complete order number, channel allocation, front connector, wiring diagram and hardware configuration. Other SM 332 variants can differ in channel count, resolution, isolation and operating functions. Additional options are available in the PLCs and accessories section.
PDF files and technical reference
For wiring diagrams, channel parameters and technical manuals, visit the S7-300 PDF files page. Manufacturer reference: Siemens 6ES7332-5HF00-0AB0 product information.
Related topics and product groups
S7-300 analog modules · Siemens S7 PLC products · Variable frequency drives · Servo systems · Analog signal converters · PLCs and accessories · Second-hand products · OtomasyonAVM home