6ES7331-7TF00-0AB0

Siemens 6ES7331-7TF00-0AB0 – SM 331 HART Analog Input Module

Siemens 6ES7331-7TF00-0AB0 is an SM 331 HART module with 8 analog current inputs. It is designed for an ET 200M distributed I/O station with a compatible IM 153-2 interface module. It transfers current signals from pressure, level, flow or temperature transmitters to a Siemens S7 PLC system and supports digital communication with HART-compatible field devices.

Input configuration and signal selection

The module supports 0–20 mA, 4–20 mA and ±20 mA analog measuring ranges. Siemens' comparison data lists a maximum resolution of 16 bits. Field wiring uses a 20-pin front connector. This is a current-input module. Applications requiring direct 0–10 V, Pt100 or thermocouple connections need an appropriate S7-300 analog input module; temperature measurements can be acquired here through a suitable current-output transmitter.

HART communication and system role

The 4–20 mA measured value and HART digital communication serve separate functions. HART provides access to parameters and status information from a compatible field device. Being able to measure a standard current transmitter does not mean that the transmitter supports HART. Access to device parameters depends on the IM interface version, project configuration, suitable software and the correct device description file.

Selecting a used module

Check the measurement performance of all eight inputs, HART communication test results, whether the connector is included and the device label. Channel readings should be checked with a suitable current source in the intended range. If HART is required, test communication separately with a compatible transmitter. A correct analog reading does not establish that HART communication has been tested. Refer to the test description for the individual unit.

PDF files and technical references

For wiring and parameter documentation, visit the S7-300 PDF files section. Manufacturer references: Siemens release of the 8-channel HART modules and 7TF00 / 7TF01 model transition.

Related topics and product groups

S7-300 analog modules | S7-300 main page | 6ES7331-7TF01-0AB0 | Siemens S7 PLC products

Used Siemens products | S7-300 PDF files | Second-hand main page | OtomasyonAVM home