6ES7331-7KB81-0AB0

Siemens 6ES7331-7KB81-0AB0 — SM 331 2-Channel Analog Input Module

6ES7331-7KB81-0AB0 is an S7-300 SM 331 module with 2 analog inputs for Siemens SIMATIC S7 PLC systems. Siemens archives identify it as AI 2 × 12 bit, designed for extended environmental conditions. When selecting from S7-300 analog modules, consider the complete order number, resolution setting and operating environment alongside the channel count.

Extended temperature range

Siemens' release notice for this range specifies an ambient temperature of −25…+60 °C. The 7KB81 code identifies the earlier version for extended environmental conditions. Cabinet design must account for the permitted operating conditions of the CPU, power supply and other components as well as this module. Mounting orientation, ventilation and enclosure selection should follow the applicable system manual.

Resolution and integration time

Although the product is designated 2 × 12 bit, resolution depends on integration time. Siemens' explanation covering this order number specifies 9 bit at 2.5 ms / 400 Hz, 12 bit at 16.7 ms / 60 Hz, 12 bit at 20 ms / 50 Hz and 14 bit at 100 ms / 10 Hz. The Hz values refer to the interference frequency suppression setting.

Select parameters with both measurement resolution and response time in mind. Integration time and PLC program scan time are different quantities; assessing when a measurement becomes available to the application requires consideration of both module and system timing.

Field signals and hardware configuration

Before commissioning, match the field device's signal type, measuring range and wiring to the manual applicable to 6ES7331-7KB81-0AB0. Temperature applications using a thermocouple, resistance sensor or transmitter have different wiring and parameter requirements. If an analog signal converter is used, selection must be based on the electrical output reaching the module.

The STEP 7 hardware configuration, channel parameters and program scaling must match the field wiring. For replacement in a Siemens ET200 station, also review the interface module and existing project configuration. The SM 331 designation on the front cover alone is insufficient when comparing PLC modules.

7KB82 successor and module replacement

Siemens' change notice dated 2 April 2001 lists 6ES7331-7KB82-0AB0 as the successor to 6ES7331-7KB81-0AB0. It describes the replacement modules as functionally identical and fully compatible. When planning replacement, use this manufacturer notice alongside a comparison of the installed module's revision information, wiring and project parameters.

PDF files and technical reference

For wiring and parameter details, visit the S7-300 PDF files page. Manufacturer reference: Siemens S7-300 analog modules with new versions and order numbers.

Related topics and product groups

S7-300 analog modules · Siemens S7 PLC products · What is a thermocouple? · Siemens ET200 · Analog signal converters · PLCs and accessories · Second-hand products · OtomasyonAVM home