6ES5 581-0ED14
Siemens 6ES5 581-0ED14 – CP 581/486 133 MHz Basic Module
Siemens 6ES5 581-0ED14 is a 133 MHz CP 581/486 basic module in the SIMATIC S5 family. It provides the processor board for CP 581 applications. Assess the board, memory, storage and software installation together when maintaining this arrangement alongside the S5 CPU.
The basic board is specified without working memory or a silicon disk. A used example may contain subsequently fitted hardware; record the parts included in the actual delivery. Preserve the communication arrangement and application files when documenting an existing Siemens S5 installation.
Processor version and model identification
Siemens identifies processor operating frequency as the difference from 6ES5 581-0ED13: 75/100 MHz for 0ED13 and 100/133 MHz for 0ED14. Read the complete order number when comparing similar modules, including 6ES5 581-0ED12, and record the installed board settings before replacement.
DRAM and storage selection
The manual lists these DRAM options: 8 MB: 6ES7 478-1AN00-0AA0; 16 MB: 6ES7 478-1AP00-0AA0; 32 MB: 6ES7 478-1AQ00-0AA0. When purchasing memory hardware, compare the installed module order number with the capacity detected at startup.
The CP 581 AT slot module, 6ES5 581-4LA11 storage module and 6ES5 581-6LA11 storage module are separate components. Identify which additional parts are needed alongside the basic board. Check the board revision and boot environment when considering another storage version.
Interfaces and display connection
The basic board has 26-pin high-density connections for COM 1/COM 3 and keyboard/COM 2, plus three coaxial RGB monitor sockets. Select cables and adapters for this arrangement. An incorrect interface adapter can make a sound board appear to have a display or communication fault.
Installation, power and software checks
Photograph the position, mounting parts and cable routing before removing the assembly from the S5 rack. Include the S5 power supply and backplane connections in the inspection. Follow the actual installation documentation when powering the board for testing.
Record the operating system, CP 581 system software, application release and startup files when documenting the software environment. Identify the PLC program backup and CP application backup separately. Confirm that the replacement installation contains the files required for operation.
During troubleshooting, check memory detection, startup, display output and application data exchange in sequence. Record each result in the PLC maintenance notes. When purchasing S5 supplementary hardware, establish the scope of testing beyond the power-on demonstration.
Editor’s Note
Start by establishing whether RAM is fitted and which capacity is installed. A bare 133 MHz basic module still needs the required components to form a working setup. For used Siemens equipment, request photographs and order numbers of the parts included.
A missing display does not immediately prove a faulty board. Check the display connection, monitor and adapter together. Confirm the cable arrangement before setting the processor board aside for repair.
If the old board still starts, preserve its settings and application files before removal. Record the boot medium, disk connections and serial port assignments. These details provide a useful reference for the replacement.
Record existing switch and jumper positions before changing them. Use the manual matching the exact revision. Check both the replacement board’s settings and the original machine configuration before transferring an arrangement.
Ask for the detected RAM capacity, storage module used and application test result. Observe a cold start and a restart. Keep a test record identifying the hardware combination that actually worked.
OtomasyonAVM resources and PDFs
+ Shared SIMATIC S5 PDF archive · S5 supplementary modules · S5 cables and connectors. Use the relevant sections of the Siemens family manual below for CP 581/486 connections and settings.
Related topics
+ 6ES5 581-0ED13 · CP 581 AT slot module · CP 581 storage module · PLC troubleshooting.
Browse SIMATIC S5
+ S5 supplementary modules and accessories · SIMATIC S5 · Siemens S5 PLC · Siemens second-hand main page.
Siemens and external references
+ Siemens CP 581 User Manual, C79000-G8576-C781-02, English, 08/1999. Processor comparison: preface, page iv; supplied configuration: section 2.1; interfaces: section 3.1; technical data: section 4.1; DRAM order numbers: chapter 5.
+ Siemens Khe001-04/2002 Declaration of Conformity, German/English, page 5. Lists 6ES5581-0ED14 as a 133 MHz CP 581 basic board.