6ES5 311-3KA11

Siemens 6ES5 311-3KA11 – IM 311 Serial Expansion Interface Module

6ES5 311-3KA11 is the IM 311 interface module for a serial connection up to 1,000 metres between a central controller and a remote expansion unit in Siemens SIMATIC S5 systems. Within the S5 interface module range, Siemens’ connection table places this model at the expansion unit.

The central-controller partner is an IM 302, 6ES5 302-3KA11 or 6ES5 302-5AA11, depending on the controller. The specified connecting cable is the 723 series. When selecting S5 cables and connectors, distinguish this arrangement from the 721 cables used for IM 310 and IM 314 connections.

Central controller and partner-module matching

Siemens’ table pairs 130A and 150A central controllers with IM 302-5AA11. It pairs 110S/B, 130K/W, 135U, 150K/S/U and 155U with IM 302-3KA11. Select the partner according to the actual controller type, rather than the S5 family name alone.

Expansion rack and field modules

The expansion-unit entries in the table are EG2 / ER 701-2 and EG3 / ER 701-3. Record the existing S5 rack’s complete code, module arrangement and connections before replacement.

Review the power supply together with the installed digital input, digital output and analog modules. When assessing the interface arrangement, compare the field modules’ addressing and operating requirements with the existing system records.

Differences from IM 310, IM 314 and IM 306

The IM 310, 6ES5 310-3AB11, belongs to a 200 m arrangement using 721 cable. The IM 314, 6ES5 314-3UA11, belongs to the 600 m arrangement with IM 304. Do not assume that an IM 304 can replace the IM 311’s IM 302 partner. Cable families and distance limits depend on the module pair.

The IM 306, 6ES5 306-7LA11, is another interface used in different connection arrangements. Similar mechanics or a shared S5 designation does not establish direct interchangeability.

Program and restart requirements

Siemens’ table includes a special restart condition for S5-150K/S/U connections. Review the actual SIMATIC S5 system’s CPU manual and startup program, preserving program, parameter and memory-card backups. Do not apply this condition indiscriminately to other S5 CPUs.

Used-module selection and connection testing

When selecting a used interface module, verify the complete 311-3KA11 code, board repairs and connectors. As with other used communication modules, applying power alone is insufficient; test actual system access with the appropriate IM 302 and 723 cable.

For long connections, inspect cable routing, shielding and grounding. Record the original arrangement before troubleshooting an existing installation, and assess module and cable changes individually.

Editor’s note

Read the partner board’s label too. An IM 311 is only one part of the connection; identify the IM 302 at the controller. Treating the two boards as a pair helps avoid an unsuitable replacement.

Keep 723 and 721 cables distinct. An old cabinet may contain similar-looking cables. Read the cable markings and inspect the connectors before changing a connection based on appearance.

The “CC interface” name can be misleading. Siemens’ table places this board in the expansion unit, providing its connection to the central controller. Consider the name together with its installed position.

Inspect the entire long-distance link. Cable joints, loose plugs and damaged shielding can create intermittent faults. Learning the cable’s history can be as useful as examining the board.

Record exactly what was tested. Note the central controller, partner module and cable used, and keep the program backup available. Clear records make the next maintenance visit much easier on an ageing system.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 manuals and PDF archive

+ S5 interface modules and model pages

Related topics

+ IM 302 central-controller partner module

+ IM 310 – 200 m connection arrangement

+ IM 314 – 600 m connection arrangement

Browse SIMATIC S5

+ Back to S5 interface modules

+ SIMATIC S5 system pages

+ Siemens S5 PLC main page

+ Used Siemens products and models

Siemens and external references

+ Siemens S5-115U, 6ES5 998-0UF23 – Table 3-4, printed 3-28: IM 302 / IM 311 and 723 cable (English)

+ Siemens CPU 945, 6ES5 998-3UF21 – Table 3-5, printed 3-20: connections to other S5 systems (English)

+ Siemens S5-135U/155U system manual – IM 310 and IM 314 connection arrangements (English)