6ES5 944-7UB21
Siemens 6ES5 944-7UB21 – S5-115U CPU 944B, 96 KB RAM, Two Serial Interfaces
Siemens 6ES5 944-7UB21 is a CPU 944B central processing unit for the S5-115U in the SIMATIC S5 family. It provides 96 KB of internal RAM, two serial interfaces, SI 1 and SI 2, and an integral real-time clock. This S5 CPU executes the user program, processes I/O data and manages machine control.
The model’s distinguishing feature is its two serial connections. 6ES5 944-7UB11 is the single-interface version. When selecting a replacement, check the port count together with the operating system submodule, program memory and existing communication settings.
96 KB RAM and memory submodules
The Siemens CPU comparison table specifies 96 KB of internal program RAM for CPU 944. The exact 7UB21 technical table lists 49,152 statements and notes that a statement usually occupies two bytes. This figure should not be interpreted as 49,152 bytes.
The CPU uses compatible EPROM/EEPROM memory submodules. The technical table specifies a maximum of 49,152 statements for EPROM and 8,192 statements for EEPROM. Match the memory type and capacity to the project. Check the current RAM program and the submodule contents separately.
Two TTY interfaces and communication options
SI 1 and SI 2 are 15-pin TTY / 20 mA current-loop serial connections. Select the programming cable, interface converter and operator panel accordingly. Record each port’s assigned function and connected equipment using the existing cable labels.
SI 2 operation depends on the operating system submodule and parameters. The Siemens manual documents the ASCII driver with 816-1BB11 and the CPU 944’s 3964/3964R connection with 816-1BB21. When the ASCII driver is active, the same SI 2 port cannot serve as a PG/OP connection. Include the complete operating system submodule code when assessing communication hardware.
Program execution and internal resources
The CPU runs cyclic, interrupt-driven and time-controlled programs in the STEP 5 programming environment. Check the programming software, project version and function blocks together. Siemens specifies approximately 0.8 µs per binary operation and approximately 0.8–3.6 µs per word operation; the complete program cycle depends on the application.
The CPU provides 2048 flag bits, 128 timers and 128 counters. Retentive behaviour depends on the selected settings and battery backup. The integral real-time clock supports time information, operating-hours functions and time-related control tasks.
Rack, addressing and CPU comparison
Install the CPU in the CPU position of a suitable S5-115U rack. Verify the power supply, digital input, digital output and analog module arrangement against the existing project. Track serial-port functions separately from field I/O addressing.
6ES5 943-7UB11, 6ES5 943-7UB21 and 6ES5 945-7UA11 are different CPU models within the S5-115U family. Assess memory, port count, operating system, program instructions and connected hardware before replacement. These codes are not an automatic list of interchangeable units.
Editor’s Note
When buying a used Siemens CPU, check the complete 944-7UB21 label and both serial ports. Request the operating system submodule code as well. If the machine uses SI 2, matching the CPU label alone is insufficient.
Before working on a running installation, back up the program, data blocks and machine-specific settings. Photograph the EPROM/EEPROM and record its code. The latest RAM program may differ from an older memory submodule; establish the contents before an overall reset.
If a PG cannot connect, check the TTY cable, converter, assigned port function and communication settings before condemning the CPU. An SI 2 port assigned to ASCII or another communication task may be unavailable for PG access.
Check the battery and power supply as part of maintaining the S5 system. Switch off rack power before removing or inserting the CPU, and secure a backup before battery or memory work. Investigate weak backup batteries and poor connections alongside processor faults.
Finish by checking diagnostics, I/O addresses, SI 1/SI 2 communications and the real-time clock through the PG, followed by a controlled machine test. Record the CPU code, operating system submodule, port assignments and backup filename.
OtomasyonAVM resources
+ 6ES5 944-7UB21 model page · Siemens S5 second-hand models · S5-115U PDF files · S5 memory cards.
Related topics
+ 6ES5 944-7UB11 · 6ES5 943-7UB11 · 6ES5 943-7UB21 · 6ES5 945-7UA11. These links support family comparison; they do not confirm direct replacement compatibility.
Browse SIMATIC S5
+ SIMATIC S5 CPU models · S5 racks · S5 power supplies · S5 cables and connectors · Siemens second-hand main page.
Siemens and external references
+ Siemens S5-115U CPU 941–944 system manual, English. 6ES5 998-0UF23 / EWA 4NEB 811 6130-02b; section 2.4: CPU comparison; printed page 15-19: exact 6ES5 944-7UB21 technical table; pages 12-20 and 12-38: SI 2 drivers and operating system requirements.