6ES5 551-3UA11
Siemens 6ES5 551-3UA11 – CP 551 Hard Disk Mass Storage Module
Siemens 6ES5 551-3UA11 is an intelligent CP 551 mass storage module for SIMATIC S5. The documented configuration includes a 20 MB hard disk, 512 KB dynamic RAM and an Intel 80186 processor. Preserve the disk contents and software installation alongside the hardware when maintaining applications used with an S5 CPU.
Assess the CP 551’s file storage and processing role when selecting S5 communication hardware. Identify disk records, application files and PLC memory backups separately. Document where each item is stored in the Siemens S5 maintenance records before replacing equipment.
System compatibility and installation
The CP 551 manual lists S5-135U, S5-150U and S5-155U installations, and specifies an EG 185 for S5-115U use. The later S5-115U system manual also describes other mounting arrangements. Check the rack layout against the documentation for the actual installation. The CP 551 occupies five mounting positions.
The S5-115U system manual shows the 6ES5 491-0LC11 adapter casing for the CP 551 in the CR 700-3 / CC 3 arrangement. Establish whether the casing, mounting hardware and connecting parts are included in a used-unit delivery. Compare photographs of the complete assembly before ordering.
Base address and page number
J55 sets the base address; J56 sets the page number. For the standard handling-block arrangement, the documented base address is 61 K = F400H, with default pages 0/1. Compare the PLC program calls and interface addressing with the board settings.
J56 selects an even starting page and reserves the following page as well. For example, starting page 4 uses pages 4 and 5. During troubleshooting, preserve the standard J55 setting. Add switch photographs and the page pair to the maintenance record.
PG connections and software
Connections include TTY/511, V.24 and ARCNET. Select the cable for the required interface. The COM 551 documentation names programmers such as the PG 675 and PG 685. Assess the software environment together with its installed release and connection hardware.
Power and disk checks
The drives require an external 24 V / 4 A supply. Check the S5 power supply and drive supply separately. When purchasing S5 supplementary hardware, request disk detection and file-reading results alongside the controller power-on test.
Back up readable contents before disk maintenance. Checking, repair and formatting operations have different effects on stored data. Preserve a backup and establish a recovery procedure before experimenting with the only working installation.
Editor’s Note
Start by protecting the information on the disk. If files remain readable, take a backup first. With used Siemens equipment, finding another module can be easier than recovering the original machine application and records.
A spinning disk is only the beginning of a test. Check successful startup, readable files and the expected exchange with the CPU. Ask which system was used for testing and keep a record you can reproduce.
Keep J55 and J56 distinct. Photograph both switch groups before removing the old unit and compare the page pair with the program. Record the existing setup before making adjustments.
The controller can appear operational while the drive supply has a fault. Check cables and drive power before condemning the complete assembly. Record each observed symptom separately to support the next inspection.
A disk from another machine needs its own application and configuration checks. Identify the files, application and address settings first. Preserve the original contents and establish how they can be restored before initialization or formatting.
OtomasyonAVM resources and PDFs
+ Shared SIMATIC S5 PDF archive · S5 supplementary modules · S5 cables and connectors. Use the Siemens CP 551/COM 551 manual below for the device’s addressing and maintenance procedures.
Related topics
+ EG 185 expansion unit · 6ES5 491-0LC11 adapter casing · PLC troubleshooting · Programming software selection.
Browse SIMATIC S5
+ S5 supplementary modules and accessories · SIMATIC S5 · Siemens S5 PLC · Siemens second-hand main page.
Siemens and external references
+ Siemens CP 551/COM 551, 6ES5 998-3SC11, edition 02, German. Exact hardware model: section 4.2.1; hardware and interfaces: 4.3; J55/J56: 4.4.1; technical data: 4.8; disk maintenance: 5.2.9.
+ Siemens S5-115U system manual, 6ES5 998-0UF23, English. Check the relevant installation tables for CP 551 and the 6ES5 491-0LC11 adapter casing.