6ES5 188-3UA32

Siemens 6ES5 188-3UA32 S5-135U/155U central rack

6ES5 188-3UA32 is the 21-slot central controller rack (CC) for Siemens SIMATIC S5-135U and S5-155U systems. The power supply feeds the modules, its fans provide cooling, and the backplane connects the installed modules.

This order number is listed in the CPU 90U–115U directory. See SIMATIC S5 and S5 racks for the wider hardware range.

Power supply and connections

Siemens pairs this rack with the 6ES5 955-3NC42 power supply. The nominal input is 24 V DC, with a range of 19.2–33 V DC. The main output is rated at 5.1 V DC / 18 A. The manual gives an input current of 9.5 A at 24 V and rated load.

Power enters through the front DC line terminals. Check L+, M and protective earth (PE) against the cabinet diagram and terminal markings. The S5 power supply range also includes similar-looking AC versions. For example, the 6ES5 188-3UA12 and 6ES5 188-3UA22 racks use 120/230 V AC input power supplies.

CPU, modules and slot assignments

The CPU is selected separately. The Siemens manual lists the CPU 928 (6ES5 928-3UA21), CPU 928B (6ES5 928-3UB21) and, for S5-155U, the CPU 948-1 (6ES5 948-3UA13). Record the existing CPU order number and memory card when choosing a replacement rack.

Use the slot assignment table on pages 4-3 and 4-4 of the Siemens manual for digital inputs, digital outputs and analog modules. Module width and permitted slot positions depend on the individual card.

Connecting an expansion rack

Siemens also lists the 955-3NC42 for the EU 183U expansion unit (6ES5 183-3UA22). The centralized I/O example in the manual uses an IM 300-3 in the central rack and an IM 312-3 on the expansion side. The last IM 312-3 requires a terminator. Compare other S5 expansion modules against the existing rack order number.

One distributed configuration in the manual pairs the IM 304 with the IM 314. Include the S5 cables and connectors on the replacement checklist. Confirm the interface module order numbers, cable and termination against the installed configuration.

Buying a used rack

Ask for separate photos of the rack and power supply labels. Confirm whether the offer includes a CPU, backup battery and front connection parts. Check the backplane sockets for corrosion or bent pins, the guide rails for cracks and the locking bar for damage.

Editor’s Note

For a used 3UA32, ask for a test record showing that the fans run and the 5 V rail was measured under load. The record should identify the modules used, the measured voltage and the status of the fan alarms.

To offer an S5 rack for sale, send a label photo, the quantity and any known operating condition to otomasyonavm@gmail.com.

Shared Siemens S5 PDF archive

Related topics

S5 interface modules · S5 communication modules · 955-3LC42 AC-input power supply

References

Siemens S5-135U/155U System Manual (English PDF). C79000-G8576-C199-07, manual order number 6ES5 998-0SH21, 11/1999. Expansion on pages 2-4 and 2-5, rack and slot assignments on pages 4-2 through 4-4, power supply on pages 4-19, 4-27 and 4-54 through 4-56.