6ES5 182-3AA21

Siemens 6ES5 182-3AA21 — SIMATIC S5 182-3A Expansion Unit

The Siemens 6ES5 182-3AA21 is a 182-3A expansion unit for adding peripheral modules to S5-130A and S5-150A controllers in the SIMATIC S5 range. This early S5 rack design uses a support profile with contact strips and an integrated power supply. Siemens lists three mounting positions without housings and three module slots fitted with type 740 housings.

Power supply

The original configuration for this order number has a 220 V AC input and a 5 V DC / 10 A output. The 5 V rail supplies the module electronics. Check the individual module nameplate for field signal and load voltages. When looking through the S5 power supply listings, verify the nameplate of the fitted supply as well. Siemens lists the similarly numbered 6ES5 182-3KH61 as an 18-slot compact 182-3K unit with a 24 V DC input and a 5 V / 8 A output.

Interfaces, cable and termination

For a distributed connection to an S5-130A or S5-150A, check both interface modules. Siemens lists the 6ES5 301-5AA13 at the host and the 6ES5 310-5AA12 at the 182-3A. Fit the 6ES5 760-0AA11 terminator at the last 310-5 in the chain. The catalog specifies the 720 series among the S5 connecting cables for this layout. For a compact host, Siemens separately lists the 6ES5 301-5CA12 variant paired with the 310-5.

When 180-3A or 181-3A units are connected locally to the 182-3A, Siemens specifies a 300-5A and a 312-5 interface suited to the physical layout. Use the catalog’s 5 A total limit for those attached units when calculating the module load.

Module housings and compatibility

The 6ES5 740-0AA11 is a module housing supplied without a terminal strip. The 6ES5 741-0AB31 is an example with a 43-pole terminal strip. When selecting digital input, digital output or analog modules, verify the full order number, housing and rack position together.

Examples in the ST 53 catalog for the A-format systems include the 6ES5 420-5AA11 32-channel 24 V DC input module and the 6ES5 441-5AA12 16-channel 24 V DC output module. Before replacement, record the module position, address setting and field terminal connections.

Buying a used unit

Ask for photos of the rack and power supply nameplates, with close-ups of the housings and contact strips. Confirm separately whether the 310-5 interface, connecting cable and terminator are included. Inspect the support profile for distortion, the contacts for corrosion and the power connections for heat damage.

Editor’s Note
Ask for two bench test results. One should show the 5 V rail under module load. The other should show the host PLC reading a known-good input module through the 310-5 interface. For a distributed chain, ask for the part number of the terminator used in the test.

PDF archive

See printed page 9/1 of the Siemens ST 53 catalog for the exact order number and power supply, and page 2/5 for the distributed connection example. Shared Siemens SIMATIC S5 PDF archive

Related topics

About Siemens S5 PLCs · S5 interface modules

Navigation · S5 central units and expansion racks · Siemens SIMATIC S5 PLC · Used Siemens automation equipment

References

Siemens SIMATIC S5-130 / S5-150 — ST 53 Catalog, 1985, E86010-K4653-A101-A5 (German)