6ES5 181-3AA11

Siemens 6ES5 181-3AA11 | SIMATIC S5 EG 181-3A expansion rack

The 6ES5 181-3AA11 is the EG 181-3A expansion rack documented for S5-130A and S5-150A configurations in the Siemens SIMATIC S5 family. Siemens calls this mechanical design Robustbauform. The STEP 5 program runs on the central controller.

Module positions and housings

This S5 rack has six module positions, numbered 1–6, and a separate position 7 for the IM 312-5. The related 6ES5 180-3AA11 has eight module positions. Check the position count and existing module layout when sourcing a spare.

The Siemens ordering table lists the 181-3A with six bare module positions and one 740 housing for the interface. I/O cards with field wiring use the 741 housing appropriate to the card. The 741-0AB31 is one version with a 43-pole terminal strip.

Interface link and 5 V system power

For local expansion from an S5-130A or S5-150A, the source side uses an IM 300-5A, and the 181-3A takes an IM 312-5. Siemens lists the 6ES5 312-5AA13 with a 30 cm fixed cable for a rack above the source and the 6ES5 312-5AA31 with a 95 cm fixed cable for a side-by-side layout.

For a local link from a compact EG 182-3K, Siemens specifies an IM 300-5C with the IM 312-5. In a distributed EG 182-3A arrangement, the IM 301-5A and IM 310-5 serve the remote link. The 6ES5 760-0AA11 terminator belongs on the last IM 310-5 on that link. The 181-3A attaches locally to the 182 through the IM 312-5.

The 181-3A receives 5 V system power through the interface link from the upstream S5 power supply. Siemens ST 53 specifies a 5 A total current limit for the connected 180/181 group in this arrangement. Check the order numbers at both ends when selecting replacement cables and connectors. Calculate the total current before adding cards to the group.

Selecting I/O cards

Match digital input, digital output and analog I/O cards to the central controller type. Siemens lists the analog cards shown for this rack with the S5-150A. The controller type also matters for special modules. The catalog lists the 242-5 counter with the S5-150A.

Checking a used rack

Ask for photos of the rack nameplate, interface position 7 and the backplane contacts. Confirm which interface, fixed cable and module housings come with the rack. Record each card position and address setting before replacing the chassis.

Editor’s Note
The IM 312-5 cable is fixed to the interface. Record whether the rack sits above or beside the source and measure the existing cable. Those two details help identify the correct replacement interface order number.

Manuals and PDF files

Page 2/3 of Siemens ST 53 shows the rack layout. See page 2/5 for the connection arrangements and page 2/9 for interface positions. OtomasyonAVM SIMATIC S5 PDF archive

Related topics

About Siemens S5 PLCs · S5 interface modules · S5 expansion modules

Navigation

S5 CPU and rack directory · SIMATIC S5 range · Used Siemens automation · Used automation equipment

References

Siemens ST 53 1985 S5-130 and S5-150 catalog (DE, PDF)