6ES5 256-3AB11
Siemens 6ES5 256-3AB11 AS 256 DIMOS display interface – German version
6ES5 256-3AB11 is the German version of the AS 256 DIMOS/VISRAM monochrome monitor interface for Siemens SIMATIC S5. DIMOS displays machine status and diagnostic messages. See the Siemens S5 PLC overview for the controller family and HMI and operator panels for other types of display equipment.
Display connection and fault diagnostics
Siemens catalog ST 53 describes a BAS monitor connection and a connection for a keyboard or printer at DIMOS/VISRAM family level. The monochrome monitor displays text and simple graphics. Check the existing DIMOS project for machine-specific messages and screens. SCADA systems cover plant-level supervision as a separate equipment category.
The PLC program calls and configures the DIMOS function blocks. Where automatic sequence diagnostics have been configured, the display shows the affected sequence and step numbers and the conditions holding up the next transition.
Matching the rack and module
ST 53 describes DIMOS for the S5-130W, S5-150K and S5-150S. The S5-115U manual also shows the DIMOS/VISRAM family on selected rack diagrams. Match the rack and slot for the 3AB11 against the machine's hardware list. The S5-135U central controller and S5-135U/155U central controller pages list rack order numbers. The CPU 928 and CPU 946 pages help identify the installed processor.
Record the S5 module groups, rack interfaces and expansion units separately in the rack inventory. Use the S5 communications modules and S5 function modules pages to identify other boards in the same cabinet.
6ES5 256-3AA11 is a separate AS 256 order number. 6ES5 255-3AA11 and 6ES5 255-3AC11 belong to the IP 255 MONA display family. The S5-210 CRT interface and S5-210 serial interface serve their own system. For a replacement, compare the full order number, hardware revision and monitor connection.
If the service record mentions a FOX PG adapter, a S5-110A test module or a S5 390 timer/counter module, record those separately from the AS 256 so the next technician knows which part was tested.
Editor’s note
1. Photograph the full part number, hardware revision, front connectors and rack slot before requesting a spare.
2. Back up the DIMOS function blocks, screen data and alarm messages before removing the board. Label the monitor cable at both ends.
3. For a blank screen, check monitor power and the BAS video cable, then try a known-good compatible monitor with the same cable.
4. If the display works but no sequence fault appears, check the DIMOS block calls, sequence parameters and message data in the PLC project.
5. For a used board, ask for a test record showing a working DIMOS screen and a sample diagnostic message. Check which rack, monitor and project were used.
Buying or selling a used module
For a quote, provide the label photo, quantity and operating condition. Price and bench-test arrangements are confirmed with the quote. To sell an AS 256, email otomasyonavm@gmail.com.
PDF documents and sources
+ Siemens ST 53 (1985), p. 6/14 — DIMOS system description, German
+ Siemens S5-115U, Figure 3-6 — DIMOS/VISRAM family rack layout, English
+ ADEGIS parts list, PDF p. 5 — exact 6ES5 256-3AB11 order number
+ PLC Hardware part record — compact monochrome DIMOS interface
Use the manufacturer's documentation for the 3AB11 pin assignments and supply ratings.
+ Siemens SIMATIC S5 PDF archive
Related topics
+ AS 256 German version 6ES5 256-3AA11
+ IP 255 MONA-C display module
+ SIMATIC S5 CPUs and central controllers