6ES5 988-3NA11
Siemens 6ES5 988-3NA11 – 24 V DC Fan Drawer for EG 184U
Siemens 6ES5 988-3NA11 is a 24 V DC fan drawer for the EG 184U expansion unit in the SIMATIC S5 family. It helps cool the electronics installed in the rack. The Siemens S5-135U/155U system manual specifies a 24 V DC rated input, a 20–30 V DC operating range and an input current of approximately 1 A.
The Siemens U Periphery manual assigns this fan unit to the 6ES5 184-3UA21 expansion unit. The 6ES5 988-3LA11 shown for 6ES5 184-3UA11 is a separate AC-powered version. Read the complete expansion-unit and fan-drawer order numbers when selecting parts for an S5 installation.
Power supply and connections
Connect the DC supply to the screw terminals marked + and −. When selecting the power supply and checking cable connections, account for startup as well as continuous operation. The manual specifies a peak inrush current of less than 10 A. During S5 maintenance, check polarity, the protective conductor connection and terminal condition.
Fan Fault indicator and Monitor Output
Stoppage of one or both fans is indicated by the red Fan Fault LED and the Monitor Output relay contact. In normal operation, 1–2 is closed and 2–3 is open. During a fault or with power removed, 1–2 is open and 2–3 is closed. Include a supply check when using these states for fault diagnosis.
If the alarm contact is connected to a digital input, verify the input-circuit voltage and wiring. Check how the PLC program handles the fan alarm. Test the external alarm circuit as well as fan operation.
Air path and installation checks
Inspect the drawer fasteners, fan blades and air inlet and outlet openings. Keep wiring, dirt and misplaced covers clear of the cooling path around analog modules and digital output modules. Assess the cooling requirements of installed S5 function hardware together with the expansion unit’s mounting instructions.
6ES5 988-3NB41, 6ES5 988-7NA11, 6ES5 981-0HA11 and 6ES5 981-0HA21 are different order numbers. Check supply requirements, mechanical construction and rack assignment individually when reviewing other cooling equipment. These references do not establish direct interchangeability.
Editor’s Note
When buying used Siemens equipment, start with a clear label photograph. Remember that 3NA11 uses a 24 V DC supply. Compare the complete order numbers on the original and replacement assemblies before installation.
Run the fans long enough to check for rubbing noises, noticeable vibration and intermittent operation. After disconnecting power, inspect for damaged blades, foreign objects and loose fan mountings.
Check the air path alongside the fans. Clean obstructed openings and seat the drawer correctly. Keep cables away from the blades and airflow openings when reassembling the unit.
If Fan Fault is active, measure the supply under load, then inspect the connections and fans. Keep the protective monitoring circuit in service. Find and correct the cause, then test the monitoring function separately.
Finish by confirming airflow and checking that the machine receives the alarm signal. Record the replacement order number, measured supply and completed checks in the maintenance notes. Leave a useful record for the next technician.
OtomasyonAVM resources
+ 6ES5 988-3NA11 model page · Siemens S5 second-hand models · S5 rack equipment · About Siemens S5.
Related topics
+ 6ES5 184-3UA21 · 6ES5 988-3LA11 · 6ES5 988-3NB41 · 6ES5 988-7NA11. Distinguish complete fan units, fan subassemblies and different supply versions.
Browse SIMATIC S5
+ S5 racks · S5 power supplies · S5 function modules · SIMATIC S5 · Siemens second-hand main page.
Siemens and external references
+ Siemens S5-135U/155U system manual, C79000-G8576-C199-07, English. Section 4.5, printed pages 4-70–4-74: connections, fan fault indication, relay states and technical specifications.
+ Siemens U Periphery manual, English. Printed page 10 of section C79000-B8576-C279-04: assignment of 6ES5 988-3NA11 to 6ES5 184-3UA21.