6ES5 946-3UA22
Siemens 6ES5 946-3UA22 CPU 946 – SIMATIC S5-155U Processor Module
Siemens 6ES5 946-3UA22 is the BSU (Bit Slice Unit) section of the CPU 946/947 processor group for S5-155U. It performs program instruction processing within the SIMATIC S5 architecture. When ordering parts for a Siemens S5 PLC, specify whether the requirement is one CPU 946 module or the complete 946/947 processor group.
How CPU 946 and CPU 947 share the work
CPU 946 handles control, arithmetic and addressing. User RAM, operating system memory and the PG communication unit are located on CPU 947. Consequently, 6ES5 947-3UA22 is a companion module with a different role, rather than a replacement for CPU 946. If the installation contains 6ES5 947-3UA21, check the order numbers and versions of both modules together.
Program memory and STEP 5 resources
The CPU 946/947 group has 64 Kwords / 128 KB of basic user RAM, physically located on CPU 947. With suitable 355 memory modules and submodules, the system memory can reach 448 Kwords / 896 KB; this is not the RAM installed on the CPU 946 board. When reviewing S5 memory modules, verify the carrier and capacity requirements of EPROM submodules such as 6ES5 373-0AA61 and 6ES5 373-0AA81.
The programming language is STEP 5. The processor group provides 256 timers, 256 counters, 2,048 flag bits and 32,768 S flag bits. These are software resources, not a count of physical field input or output channels.
PG connection and system communication
The 15-pin PG connector is on the front of CPU 947; the system PG transmission rate is 9,600 bit/s. Check the S5 cables and connectors together with the programming adapter before connecting. Select S5 interface modules to suit the existing installation; do not assume CPU 946 provides a direct Ethernet connection.
CPU 946 uses the S5 system bus and S5 local bus. In multiprocessor installations, the 923C coordinator / 6ES5 923-3UC11 and rack configuration require attention. Record the module position, neighbouring modules and system configuration before starting a replacement.
Power supply, dimensions and operating conditions
The module receives 5 V DC ±5% through the backplane. CPU 946 consumes approximately 6 A; CPU 947 separately consumes approximately 2 A. Include the other installed modules when assessing S5 power supply capacity. When reviewing 6ES5 955-3LF12 or 6ES5 955-3NF11, check the rack’s incoming supply and installed power supply version.
CPU 946 measures approximately 40.64 × 233.4 × 160 mm (width × height × depth) and weighs approximately 900 g. Its protection rating is IP00, with an operating temperature of 0–55 °C. Treat the double-width assembly and its two printed circuit boards as one unit; do not separate the boards.
Related order numbers and replacement checks
6ES5 946-3UA11, 6ES5 946-3UA21 and 6ES5 946-3UA23 are different order numbers around the same CPU model designation; the words “CPU 946” alone do not establish interchangeability. 6ES5 946-3UR21 belongs to the R family. 6ES5 948-3UA12 CPU 948 uses a different processor architecture. Base the replacement decision on the complete code, hardware/operating system version, CPU 947, memory configuration and existing project.
Editor’s Note
First, be clear about what you are buying. Do you need CPU 946 alone, or both 946 and 947? Photographs of both labels and their rack positions can prevent an incorrect order before it happens.
Keep the program location in mind. User RAM is on the 947 side; record any memory fitted to a 355 module as well. Verify the project backup before removal, check battery condition and review causes of memory data loss. Replacing CPU 946 does not automatically provide the machine program.
Complete the test with the companion module. Use a suitable rack, establish a PG connection through CPU 947, read the program and diagnostic information, and perform a controlled operating test. A RUN light alone does not demonstrate that every function works.
Give the supply and cooling proper attention. CPU 947 and the other modules add to CPU 946’s approximately 6 A load. Have the fans, airflow and 5 V rail checked. Switch off power before removing or inserting modules, and keep the double-board assembly intact.
Do not make an overall reset your first troubleshooting step. Record RUN, STOP, SYSFAULT, QVZ, ADF and ZYK indications and obtain PG diagnostics. An overall reset can erase RAM contents. Investigate the supply, backplane connections and program condition before condemning the CPU.
Technical resources and PDF documents
See About Siemens S5 PLC for series information and the S5 PDF archive for documents. For this model, use the CPU hardware and 355 memory sections of S5-155U CPU 946/947, 6ES5 998-0UM22, Release 07.
Related topics
CPU 946-3UA21 · CPU 946-3UA23 · CPU 947-3UA22 · CPU 948-3UA12 · S5 memory modules. These links support further comparison and do not confirm direct interchangeability.
Navigation: 6ES5 946-3UA22 main page | Used Siemens models | Siemens S5 PLC | SIMATIC S5
External references
Siemens S5-155U CPU 946/947 manual – 6ES5 998-0UM22, Release 07 (English). The CPU technical description starts on PDF page 127; technical data appears on pages 132–133.