6ES5 581-6LA11

Siemens 6ES5 581-6LA11 – CP 581 Mass Storage Module with 10 GB Hard Disk

Siemens 6ES5 581-6LA11 is a CP 581 mass storage module with a 10 GB hard disk in the SIMATIC S5 family. It provides file storage for the CP 581 system. Disk capacity should be assessed separately from S5 CPU working memory and the memory used by the PLC program.

Depending on the installed application, this storage arrangement may contain the operating system, CP software, application files and recorded data. Identify the required function when selecting S5 memory hardware. During Siemens S5 maintenance, record the files that must be preserved alongside the module order number.

10 GB capacity and version identification

10 GB is the nominal hard disk capacity associated with this order number. Check disk partitions, the file system and the installed operating system when assessing usable space. When considering replacement of another CP 581 storage model, such as 6ES5 581-4LA11 or 6ES5 581-5LA11, establish compatibility beyond the capacity difference.

CP 581 basic board and assembly checks

Within the CP 581 system, the storage module is separate hardware used with the basic board. For an installation containing 6ES5 581-0ED13 or 6ES5 581-0ED14, record the board revision and existing hardware combination before planning a replacement. These references do not establish compatibility between 6LA11 and every revision.

The CP 581 AT slot module and CP 581 RAM expansion serve different functions. Identify the exact part to be replaced before ordering. Photograph the S5 rack arrangement, inter-board connections, mounting hardware and assembly labels before dismantling.

Connections and software environment

The CP 581 family manual describes LPT and COM 4 interfaces on the storage module. Match cables and connectors to the actual board markings and revision documentation. Establish the interface connection independently of the connector’s appearance.

Preserving the existing installation matters alongside software selection during disk replacement. Record the operating system, application release, startup files and any required authorization hardware. Include the application’s S5 communication arrangement and connection settings in the backup records.

Disk backup and used-unit testing

Where possible, start by creating a complete disk image and verifying that it can be read. Test startup and the application on a separate working copy. During PLC troubleshooting, repair or formatting operations performed directly on the working disk can cause additional data loss.

For PLC maintenance checks, record disk detection, file reading, successful startup and application access to the expected data separately. Identify the PLC program backup and CP 581 disk backup as separate items; restoring the machine may require both.

When purchasing S5 supplementary hardware, establish which disk and connecting parts are included. Keep label photographs, the hardware revision and the scope of testing in the purchasing record.

Editor’s Note

Start by preserving the information on the disk. If it remains readable, take a backup before extended testing. With used Siemens equipment, the files belonging to a working application can be harder to replace than the hardware.

A spinning disk is only the start of a test. Check for read stalls, incomplete startup and application access to the correct data. Combine the power-on demonstration with a test of the intended operation.

Photograph connections and settings before removing the old disk. Keep its label, the board revision and the existing boot configuration in the record. These details make it easier to identify what changed after replacement.

A disk from another machine needs its own compatibility checks. Even when the module model matches, files, connection settings and applications can differ. Use a separate copy for controlled testing first.

Ask the seller which CP 581 basic board was used for testing. Request the startup and file-reading results, including any errors observed. A repeatable test record gives the receiving workshop a useful starting point.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 PDF archive · S5 supplementary modules · S5 memory modules. The CP 581 family manual edition below covers older storage versions; use documentation matching the exact order number and revision for the complete 6LA11 specifications.

Related topics

+ 6ES5 581-4LA11 · 6ES5 581-5LA11 · CP 581 AT slot module · PLC troubleshooting.

Browse SIMATIC S5

+ S5 supplementary modules and accessories · SIMATIC S5 · Siemens S5 PLC · Siemens second-hand main page.

Siemens and external references

+ Siemens CP 581 User Manual, C79000-G8576-C781-02, English, 08/1999. Scope: preface; assembly: section 2.7; storage module: section 3.2. The scope list for this edition does not include 6ES5 581-6LA11.

+ Siemens Khe001-04/2002 Declaration of Conformity, German/English, page 5. Lists 6ES5581-6LA11 as a CP 581 mass storage module.

+ SIMATIC Price List FY04/05, page 49/128, online archive copy. The 6ES55816LA11 entry identifies the 10 GB hard disk version; historical prices are not current selling prices.