6ES5 484-8AC11
Siemens 6ES5 484-8AC11 – EKL 484 Digital Output Module
Siemens 6ES5 484-8AC11 is an output module for the EKL 484 electronic terminal system in the SIMATIC S5 family. Product records identify it as 16 digital outputs, 24 V DC, with galvanic isolation. When assessing it among S5 digital output modules, account for the EKL system’s distributed arrangement near the machine.
EKL abbreviates the German Elektronische Klemmenleiste. The “Electronic Terminator” description in some records refers to the electronic terminal system; line termination plugs such as 6ES5 760-0AA11 and 6ES5 760-0AB11 are separate products. Keep the output module and line termination component distinct.
EKL system arrangement and mounting
Siemens’ ST 53, 1985 catalog describes the EKL 484 family in the S5-130/S5-150 context. The system uses an interface module and field I/O modules. Family mounting options include screws on a metal plate or a suitable base on a 75 mm rail. Inspect the installed base before treating it as an ordinary S5 rack board or a module fitting directly onto a 35 mm rail.
When checking S5 interface modules, record the complete numbers of components such as 6ES5 301-3AB13 IM 301 and 6ES5 310-3AB11 IM 310. Knowing the S5 CPU designation alone is insufficient; establish the intermediate connection arrangement, installed modules and cables together.
Use complete order numbers for S5 cables and connectors. Distinguish 721-family connections such as 6ES5 721-0BB00, 6ES5 721-0BB60 and 6ES5 721-0BC00 from the 730-family connections between EKL modules. Similar appearance or a shared Siemens name does not establish the same function.
Output current and isolation checks
Channel currents, total load limits and isolation groups for this exact code have not been verified against a manufacturer data sheet. Do not assign the same current rating to every output. Select loads against the individual channel limit, simultaneous loading conditions and installation documentation rather than transferring values from another EKL module.
A galvanic isolation description does not establish that every output is individually isolated from every other output. Check field common connections and isolation groups against the connection document. Do not substitute the 6ES5 484-8AB11 input module or 6ES5 484-8AD11 mixed I/O module for 8AC11 based on housing appearance.
Identify S5 digital inputs, digital outputs and mixed I/O modules separately in offers and maintenance records. Establish the switched coil or lamp voltage, continuous current and starting load. If selecting an external relay or protective device, assess the requirements of both the load and output.
Addressing and commissioning
Match the output address in the PLC program to its physical terminal and load. Preserve address labels and connection records before dismantling. An active software output does not establish a sound field supply or load circuit; check the command, wiring and actual output behaviour separately.
Confirm whether the base, cover, terminals and connecting cables are included when purchasing S5 accessories and expansion modules. About Siemens S5 PLC provides general background. Record acceptance results against the installed EKL assembly’s documentation and complete hardware identification.
Editor’s Note
When buying an EKL module as used Siemens equipment, check the label and all connecting parts first. A sound board can still be difficult to install if its base, cover or special cable is missing. Request photographs of the original assembly and identification of neighbouring modules.
Check the field supply, common connections, terminal tightness and load cable before attributing a failed channel to the board. Record software commands separately from field measurements to distinguish wiring faults from output-stage faults.
Test outputs individually with a suitable small load first. Do not declare every channel sound from its LED indication. Record the measured voltage, applied load and channel number during testing.
Do not connect a coil using an assumed channel current rating. Outputs within the same housing need not have identical load capabilities. Establish the applicable current limit and any external protection before testing with the production load.
Mark cables and terminals and photograph address labels before dismantling a working arrangement. Disconnect power and use ESD precautions. Verify that every output operates the correct load during the final check, and retain a clear test record for future maintenance.
OtomasyonAVM resources and PDFs
+ Shared SIMATIC S5 PDF archive – S5-115 PDF files. The ST 53 catalog below covers EKL 484 family arrangements but does not contain a separate 8AC11 technical table.
Related topics
+ 6ES5 484-8AB11 · 6ES5 484-8AD11 · 6ES5 301-3AB13 · 6ES5 310-3AB11 · 6ES5 760-0AA11
Browse SIMATIC S5
+ S5 digital output modules · S5 cables and connectors · S5 expansion modules · Siemens SIMATIC S5
Siemens and external references
+ Siemens SIMATIC S5-130/S5-150, Catalog ST 53, 1985 – German. Section 5: EKL 484 family arrangement and mounting; section 8: technical tables for the catalogued modules. This manufacturer document is hosted by an external archive; 8AB/8AD ratings must not be transferred to 8AC11.
+ Product identification record for 6ES5484-8AC11 – secondary catalog. Identification as 16 outputs, 24 V DC, with galvanic isolation; this does not replace a detailed manufacturer hardware data sheet.