6ES5 734-2BF00

The 6ES5 734-2BF00 is a connection cable designed for the SIMATIC S5 series. This 5-meter cable is used to connect PG 7.. programming devices to SIMATIC S5 PLCs, covering models from S5-90U to S5-155U. It provides reliable communication for programming, diagnostics, and data exchange tasks in industrial automation.

Device Description

The Simatic S5 734-2 connection cable facilitates seamless communication between PG 7.. programming devices and S5 PLCs. Its robust design ensures stable data transmission, making it suitable for configuring and troubleshooting PLCs across the entire SIMATIC S5 range.

Technical Data

    Product Code: 6ES5 734-2BF00
    Compatibility:
        Programming Devices: PG 7.. series (e.g., PG 720, PG 740, PG 750)
        PLC Models: S5-90U, S5-95U, S5-100U, S5-115U, S5-135U, S5-155U
    Cable Length: 5 meters
    Interface Type: Standard S5 connection ports for programming and data exchange
    Application Scope: Programming, monitoring, and troubleshooting in industrial automation

Programs

    Programming Tasks: Facilitates uploading, downloading, and editing PLC programs.
    Diagnostics: Supports system monitoring and error diagnosis for the connected PLC.
    Real-Time Communication: Enables efficient communication for commissioning and maintenance.

Repair and Commissioning Recommendations

    Installation:
        Connect one end of the cable to the programming port on the PG 7.. device.
        Attach the other end to the corresponding port on the SIMATIC S5 PLC.
        Ensure all connections are tight and secure for uninterrupted communication.

    Testing:
        Power on both the programming device and the PLC to test the connection.
        Verify data transmission by running diagnostics or a test program.

    Maintenance:
        Inspect the cable regularly for physical wear, especially at connector points.
        Store the cable properly to prevent bending or mechanical stress that could affect performance.

Editor’s Recommendations and Experiences

    Reliability: The 6ES5 734-2BF00 is a dependable choice for interfacing PG devices with S5 PLCs, offering stable communication over its 5-meter length.
    Applications: Best suited for environments where programming and diagnostics require a reliable and extended reach.
    Maintenance Tip: Use cable ties or cable management systems to keep the cable organized and free from accidental damage.
    Backup Strategy: Keep an additional cable on hand for critical applications to minimize downtime during replacements or repairs.


+ Siemens S5 PLC User Manual (pdf page)

+ Siemens 6ES5 734-2BF00 User Manual (pdf)

+ Siemens Automation Homepage >

+ Siemens Automation Contact (for Automation Mall)

+ About Siemens S5 PLC >

Reminder: Siemens 6ES5 734-2BF00 and other Simatic PLC modules are available for sale at Otomasyon Mall. Please note that some devices are used products, so take this into consideration when purchasing. Once these products are out of stock, new ones will not be restocked. The information above is based on general knowledge and does not guarantee accuracy. For more detailed and precise information, it is recommended to refer to the relevant device’s user manual. (01.08.2011)

Please Note: The user manuals, commissioning suggestions, error codes, and solution recommendations provided on this page are not binding. The information and documents above are open to and even in need of improvement. As the Otomasyon Mall Community, we gladly welcome your suggestions and contributions. If you have field experience and insights on ease of use, please feel free to share them with us!