6ES7 120-0AH50-0AA0

6ES7 120-0AH50-0AA0 – Siemens TB16IM-SC Screw-Terminal Block

6ES7 120-0AH50-0AA0 is the TB16IM-SC terminal block with screw terminals for ET 200L-SC IM-SC stations in the Siemens ET 200 family. It carries the IM-SC interface and SIMATIC Smart Connect electronic modules. This terminal block provides the field-wiring and module connections; the installed electronic modules determine the input/output functions.

IM-SC interface and slot capacity

The matching interface is 6ES7 138-1XL00-0XB0 IM-SC, which provides the PROFIBUS DP connection. The base has eight single-width module slots. Some analog output modules occupy two slots, so eight slots do not always accommodate eight separate modules. Account for module width when planning the layout.

Compatible SC modules include the 6ES7 121-1BB00-0AA0 digital input, 6ES7 122-1BB00-0AA0 digital output and 6ES7 123-1FB00-0AB0 analog input modules. When selecting analog and interface modules, check the measurement type, wiring arrangement and device definition in the PLC project together.

Load supplies and current limit

1L+/1M supplies slots A–D; 2L+/2M supplies slots E–H. 3L+/3M provides a loop-through connection for the second supply group. Maximum current-carrying capacity is 2 × 8 A through 1L+ and 2L+. This does not give each output an 8 A rating; the installed electronic module determines the permissible output current.

Assess the loads of each group separately when checking the power supply. If all outputs in one group stop working, inspect that group’s supply wiring, fuse and terminal contacts before replacing electronic modules. Verify any bridges against the actual installation diagram.

Wiring and expansion

The base can be wired before installing the electronic modules. Its standard two-wire connection can be extended to three- or four-wire connections with suitable supplementary terminals. Adding one TB16SC provides eight additional single-width slots. For the wiring arrangement, use the terminal assignments of the module installed in each slot; terminal position alone is insufficient.

Differences between similar part numbers

6ES7 120-0BH50-0AA0 is the TB16IM-SC version with spring terminals. 6ES7 120-0AH01-0AA0 is the TB16SC expansion base with screw terminals. The main base carrying the IM-SC and the expansion base serve different roles. See the Siemens ET 200 overview when comparing system arrangements.

Dimensions and used-unit inspection

The Siemens data sheet specifies 160 × 100 × 73.6 mm and an approximate weight of 260 g. Allow additional space for cable bends and connector access when planning the cabinet layout.

For a used base, inspect the clamping action of the terminal screws, plastic housing, module contacts and rail latch. Discoloration or loose contacts deserve closer examination even if the exterior is clean. Inspect with power isolated, and identify the wiring and module positions before removal to reduce errors during reassembly.

Editor’s Note: The condition of the terminals and module contacts matters most when assessing this part. Confirm the full base code and what is included: an IM-SC or electronic module visible in a photograph may be sold separately. When several channels in the same group have problems, include the shared supply connection in the investigation.

User manuals and PDF documents

Use the Siemens ET 200 manuals and PDF documents page for references. In the ET 200L, ET 200L-SC and ET 200L-SC IM-SC Distributed I/O Device manual, Section 7.5 covers the base, Section 3.6 covers wiring and Section 9.1 describes the IM-SC interface. The model-specific Siemens data sheet and page 4/29 of the ST 40 catalogue are also relevant.

Related topics

Explore other ET 200 groups through special input modules, special output modules, function modules, counter modules, positioning modules and other network interfaces. These categories cover different ET 200 subfamilies; they are not a list of modules that can be fitted directly to this base.

Navigation

Siemens ET 200 | Siemens SIMATIC S7 | Siemens automation | OtomasyonAVM home