6ES7 194-4CB00-0AA0
Siemens automation › SIMATIC S7 › Siemens ET 200 › 6ES7194-4CB00-0AA0
Siemens 6ES7 194-4CB00-0AA0 ET 200pro CM IO 8 × M12 Connection Module
6ES7 194-4CB00-0AA0 is the CM IO 8 × M12 connection module for ET 200pro digital electronic modules. Its eight M12 female sockets connect field cables to a compatible electronic module. Within Siemens ET 200 distributed I/O systems, this component provides the connection layer; the electronic module behind it determines the input or output function.
Which electronic modules can it be used with?
The Siemens connection compatibility matrix lists the 8 DI modules 6ES7141-4BF00-0AA0 and 6ES7141-4BF00-0AB0, the 8 DO module 6ES7142-4BF00-0AA0, and the 4 DI / 4 DO module 6ES7143-4BF50-0AA0 for this connection module. When selecting ET 200 digital input modules or ET 200 digital output modules, record the complete electronic module order number as well.
For the 16 DI module 6ES7141-4BH00-0AA0, the matrix specifies 6ES7194-4CB50-0AA0, CM IO 8 × M12D. Having the same number of sockets does not make 4CB00 and 4CB50 interchangeable. Select the connection module for ET 200 analog input modules separately too; 4CB00 is intended for digital electronic modules.
Choosing between eight and four sockets
With compatible 8 DI and 8 DO modules, CM IO 8 × M12 brings the signals out to separate M12 connections. The CM IO 4 × M12 option allows double signal assignment at each socket. When comparing ET 200 connection modules, consider existing cables, Y connections and field labels together.
This choice changes the wiring arrangement, not the number of electronic channels. When reviewing the ET 200 system configuration, treat the electronic module, connection module and station interface as separate components. The relevant station interface handles communication through PROFIBUS and PROFINET interfaces; 4CB00 is not a network connection module.
Dimensions, installation and socket arrangement
The Siemens technical data sheet specifies 45 × 130 × 39 mm (width × height × depth) and an approximate weight of 305 g. The connection module plugs onto the electronic module and is secured with screws. The pin functions of sockets X1–X8 depend on the electronic module used. Mechanical fit alone is not enough to select a field cable.
Five checks before selection or replacement
1. Both component codes: Record the 6ES7194-4CB00-0AA0 connection module and the electronic module behind it. Recording only the code visible on the front can result in the wrong component being identified for maintenance.
2. Cable and pin assignment: Compare the X1–X8 labels with the machine drawings. Add cable order numbers to your parts records for ET 200 terminal blocks and connection components; check pin assignments again when changing the connection arrangement.
3. Supply and load: Identify the ET 200 power supply modules and power distribution components in the station drawings. Obtain sensor supply and output load limits from the electronic module specifications; do not infer current capacity from socket count.
4. Sealing and mechanical condition: Close unused M12 sockets with suitable caps. Connections must be completed correctly to meet IP65/IP66/IP67 protection conditions. Inspect socket threads, contacts and sealing surfaces, and prevent cable weight from straining the connections.
5. Commissioning check: Photograph the cable arrangement before replacement. Afterwards, monitor inputs and check outputs using the machine's safe test procedure to confirm that channel labels match the actual field devices.
Editor's note: When investigating an intermittent channel, inspect its plug, cable and contacts before replacing the electronic module. Including the socket number in the fault record helps distinguish a connection problem from an electronic fault.
Manuals and PDF documentation
Use the Siemens ET 200 PDF documentation and user manuals page to find ET 200pro documentation. Read the CM IO 8 × M12 section together with the pin assignment table for the installed electronic module. Siemens connector and cable compatibility document 50102465 is also a useful reference when selecting the connection module.
Related topics
Power and connections: Power supply modules · Terminal blocks · Connection modules · Power distribution modules
Explore the station: About ET 200 · Communication interfaces · ET 200 manuals
Otomasyon AVM | Siemens:
Siemens main menu | Siemens S7 PLC | SIMATIC S7 | ET 200 modules