6ES7 193-7DA20-0AA0

Siemens automation › SIMATIC S7 › Siemens ET 200 › TM-PS-A

Siemens 6ES7 193-7DA20-0AA0 — ET 200iSP TM-PS-A Terminal Module

The 6ES7 193-7DA20-0AA0 is a TM-PS-A standard power supply terminal module for ET 200iSP, part of the Siemens ET 200 distributed I/O family. It provides the base that holds the power supply and carries its supply wiring. It belongs to the ET 200 terminal block category; it is not a standalone power supply.

Compatible power supplies

Siemens specifies this base for PS AC120/230V and PS DC24V from product version 7 onwards. A “24 V DC” label alone is therefore insufficient for selection: check the complete order number and product version of the ET 200 power supply module. The AC and DC references do not mean that both voltages should be connected simultaneously; wiring depends on the power supply fitted.

The TM-PS-A base and its plug-in power supply are separate components. When reviewing ET 200 connection modules and power distribution components, identify the terminal base, power supply unit and remaining station hardware separately.

TM-PS-A, TM-PS-B and the earlier terminal base

6ES7193-7DA20-0AA0 is the standard TM-PS-A base. The TM-PS-B 6ES7193-7DB20-0AA0 serves the redundant power supply position. The earlier TM-PS-A 6ES7193-7DA10-0AA0 also has a different power supply pairing. Similar appearance does not establish interchangeability between these order numbers.

Role within the station

In an ET 200 station architecture, power distribution and communication are separate functions. This terminal base does not perform the role of PROFIBUS and PROFINET interface modules. The station's digital input modules, analog input modules and digital output modules also require their own suitable bases. These category links support comparison across the range; not every listed product is compatible with ET 200iSP.

Five checks before selection or replacement

1. Complete order number: Confirm 6ES7193-7DA20-0AA0 on the label, paying particular attention to the DA10, DA20 and DB20 variants.

2. Power supply version: Record the installed unit's AC/DC type, order number and product version. For DC operation, verify Siemens' requirement for product version 7 or later.

3. Supply arrangement: Identify whether the station uses a single or redundant supply. For a redundant arrangement, the presence of a second power supply alone is not enough to select the base; check the terminal layout too.

4. Physical condition: Inspect terminals, contacts, locking parts and the housing. Heat damage, cracks or mechanical damage should not be dismissed simply because electrical continuity is present.

5. Ex installation: Assess the area classification, component markings, enclosure and wiring requirements together. Follow the manufacturer's applicable installation and maintenance instructions.

Editor's note: A common purchasing mistake is to treat the terminal base as a complete power supply. Photograph the base label and the power supply label separately before ordering. Make the scope of supply explicit: terminal base only, or an assembly including the power supply. On an older station, exact order numbers and product versions are more useful than visual similarity.

Manuals and PDF documents

For installation, power supply matching and wiring details, visit the Siemens ET 200 PDF and user manuals page. The relevant document is ET 200iSP Operating Instructions; consult its product overview, terminal module, power supply and wiring sections together.

Related topics

Power and connections: Power supply modules · Terminal blocks · Connection modules · Power distribution modules

Explore the station: About ET 200 · Communication interfaces · ET 200 manuals

Otomasyon AVM | Siemens:
Siemens main menu  |  Siemens S7 PLC  |  SIMATIC S7  |  ET 200 modules