6ES7 193-4CF40-0AA0
Siemens Main Menu › SIMATIC S7 › ET 200 Modules
Siemens 6ES7 193-4CF40-0AA0 — ET 200S TM-E30S46-A1 Terminal Module
6ES7 193-4CF40-0AA0 is the TM-E30S46-A1 screw-terminal module for ET 200S, part of the Siemens ET 200 family. It provides the base for a compatible electronic module and its field wiring. It belongs to the ET 200 terminal block range and does not independently process signals or run a control program.
Connections and technical characteristics
Connection: Screw terminals, 24 connection points in a 4×6 arrangement. Dimensions: 30 × 157 × 43 mm (width × height × depth). Approximate weight: 158 g. AUX1: Continuous bus with access through additional terminals.
24 connection points do not mean 24 I/O channels. Terminals 1–16 follow the electronic module's wiring assignment; eight additional A terminals provide AUX1 connections. Keep terminal count separate from channel count when choosing connection modules and wiring bases.
Checking the AUX1 potential
The continuous AUX1 bus and its accessible terminals matter when reviewing power distribution and potential groups. Do not automatically identify AUX1 as PE, 0 V or +24 V. Establish the actual potential from the cabinet schematic and supply arrangement. Accessible terminals do not permit different potentials to be connected to the same bus.
Differences between similar order numbers
6ES7193-4CF50-0AA0 is the TM-E30C46-A1 spring-terminal version. 6ES7193-4CG20-0AA0 / TM-E30S44-01 uses a 4×4 screw-terminal arrangement without AUX1 terminal access. Substituting 4CG20 for 4CF40 may therefore remove AUX1 connection points used by the application; do not assume a direct replacement.
TM-E and TM-P also have different roles. This product is an electronic-module base. It is not equivalent to 6ES7193-4CK20-0AA0 / TM-P30S44-A0, used for suitable ET 200 power supply modules.
Use with safety modules
Siemens lists TM-E30S46-A1 among the terminal options for suitable F-DI and F-DO electronic modules. When selecting fail-safe safety modules, check the base, the exact electronic module and the application requirements together. This terminal alone does not establish a safety integrity level. PROFIsafe safety communication must likewise be assessed with the appropriate controller, module and validated safety application.
Five checks before selection
1. System and module: Confirm that the installed subfamily within the ET 200 system architecture is ET 200S. Follow the terminal requirements stated in the electronic module's manual.
2. Terminal assignment: Do not assume that digital input modules and digital output modules share the same wiring. A numbered terminal's function depends on the fitted electronics; compare wire labels with the correct diagram.
3. AUX1 requirements: Establish whether the application uses the additional A terminals. Comparing only terminals 1–16 is not enough when selecting a replacement base.
4. Cabinet space and conductor preparation: Allow for the 157 mm terminal height alongside cable ducts and working clearance. Obtain conductor cross-sections, stripping lengths and screw tightening torques from the applicable Siemens wiring instructions.
5. Condition and delivery scope: Inspect screw threads, terminals, bus contacts and locking features. For a used item, check for heat damage, corrosion and broken parts. Confirm separately whether the electronic module is included.
Editor's Note
The key selection issue is how the additional terminals are used in the installation. Photograph and label the A terminals as well as the main connections before removal. Fitting a similar-looking base and moving wires by position can change potential distribution. Replace the base only after making the machine safe and isolating the relevant supplies. Where a safety circuit is involved, complete the required functional checks before returning it to service.
PDF manuals and wiring diagrams: Visit Siemens ET 200 user manuals and PDF documents and consult ET 200S Terminal Modules, A5E01120034-01. Section 1.12, pages 26–27, covers this terminal family. Use the electronic module's own manual alongside it for signal assignments.
Related Topics
Terminal Blocks · Connection Modules · Power Distribution Modules · Safety Modules
Otomasyon AVM
Siemens Main Menu · SIMATIC S7 · ET 200 Modules · ET 200 PDF Manuals · PLC and HMI