6ES7 138-4FA00-0AB0

Siemens Main Menu › SIMATIC S7 › ET 200 Modules

Siemens 6ES7 138-4FA00-0AB0 — ET 200S 4/8 F-DI PROFIsafe Input Module

6ES7 138-4FA00-0AB0 is a 24 V DC fail-safe digital input module for the Siemens ET 200S distributed I/O system. It transfers signals from suitable sensors and contacts to a safety controller in applications such as emergency stops and guard monitoring. It belongs to the ET 200 fail-safe module range and uses PROFIsafe safety communication.

What does 4/8 F-DI mean?

The module has eight physical digital inputs. Siemens module lists specify operation with eight inputs up to SIL 2 or, when inputs are evaluated in pairs, four safety input signals up to SIL 3, subject to the applicable configuration requirements. 4/8 does not mean four inputs and eight outputs.

Dual-channel evaluation monitors two signals belonging to the same safety function together. For example, a suitable guard arrangement with two contacts can be evaluated through an input pair. The usable signal count depends on sensor wiring and parameter settings. Unlike standard digital input modules, the application requires more than reading an on/off state: the appropriate safety evaluation must also be established.

System role and compatibility

This is an F-DI input module; it does not drive actuators. Suitable digital output and F-DO modules must be selected separately for contactor or valve control. Within the ET 200 station architecture, the input module, F-CPU, safety program and output stage work together. The module's supported SIL capability does not automatically establish the same level for the completed machine.

When assessing PROFIBUS and PROFINET interface modules, use the complete order number 6ES7138-4FA00-0AB0. Do not transfer network compatibility, diagnostics or software features from later 4FA revisions to this model. Check the installed interface, hardware catalogue and safety project together before selecting a replacement.

Terminal bases and sensor supply

The historical Siemens accessory table lists screw-terminal bases 6ES7193-4CG20-0AA0 and 6ES7193-4CF40-0AA0, plus spring-terminal bases 6ES7193-4CG30-0AA0 and 6ES7193-4CF50-0AA0 for this F-DI. When choosing ET 200 terminal blocks, check the installed terminal arrangement and AUX1 requirements. Connection modules and terminal bases are separate from the electronic module.

Trace the ET 200 power modules and sensor supply arrangements through the cabinet schematic. Even when power distribution and potential groups appear correct, sensor output type, test pulses and input evaluation must be compatible. A 24 V rating alone does not make a sensor suitable for a safety application.

Five checks before selection or replacement

1. Input count and evaluation: Establish whether the application requires eight separate signals or four dual-channel safety signals. Obtain channel pairing from the wiring diagram for the applicable version.

2. Sensors and contacts: Do not treat mechanical contacts, electronic safety sensors and OSSD outputs as equivalent. Verify the sensor manufacturer's wiring requirements, supply arrangement and module compatibility.

3. Timing: Assess input delay, permitted timing difference between channels and PROFIsafe monitoring time within the total application response time. Do not arbitrarily extend timing settings merely to suppress a discrepancy fault.

4. Address and project: Check that the module's safety address matches the project assignment. Record its label and hardware version and retain a backup of the working project before replacement.

5. Functional testing: After replacement, verify each safety sensor's effect, safe stopping and restart conditions against the validated test plan. Changing input LEDs alone does not establish correct safety operation.

Editor's Note

Start by establishing how many safety signals must be monitored and how they will be evaluated. Confusing eight physical inputs with four dual-channel signals can undermine both the parts list and safety configuration. For a used module, verify the complete model and hardware version; a power-up check and illuminated LEDs are not a safety test.

PDF manuals and technical documents: Visit Siemens ET 200 user manuals and PDF documents for the ET 200S Fail-Safe Modules documentation. Check that the manual's scope covers the 4FA00 revision. Page 45 of Siemens PCS 7 Released Modules, A5E50382290-AE, identifies this model's 4/8-input and SIL configurations; it does not replace wiring and parameter instructions.