6ES7 195-1BE00-0XA0
Siemens Main Menu › SIMATIC S7 › ET 200 Modules
Siemens 6ES7 195-1BE00-0XA0 — Simplex Fiber-Optic Plug Adapter
6ES7 195-1BE00-0XA0 is a Simplex plug adapter for optical PROFIBUS connections. Within Siemens ET 200 distributed I/O systems, it is a documented accessory for the fiber connection of the IM151-1 FO STANDARD interface. It holds two Simplex plugs together in a duplex arrangement and is a passive connection component.
Function and package contents
The adapter holds the prepared fiber connectors in the required mechanical position. It does not amplify signals, convert electrical PROFIBUS to optical signals or add I/O channels. When reviewing ET 200 connection modules and accessories, distinguish this part from active communication hardware.
The Siemens order package contains 50 plug adapters. Used or split-pack stock may be offered individually, so confirm the quantity in the quotation. 6GK1901-0FB00-0AA0 is a separate product containing 100 Simplex plugs and 5 polishing sets. Ordering the adapter does not imply that these plugs or a fiber cable are included.
Checking compatibility
PROFIBUS and PROFINET interface modules use different connection arrangements. Verify the device’s optical interface and Simplex connection requirements before selecting this adapter. Siemens also lists this order number among IM 467 FO accessories. Its use therefore extends beyond ET 200S, but this does not make it compatible with every fiber port.
When comparing the Siemens product and spare parts range, do not match components by appearance alone. Record both the adapter code and the complete device model when identifying SIMATIC S7 system components.
Five checks before selection
1. Interface model: Read the interface module label. Use the ET 200 system and product family guide to identify the station; a general “ET 200 compatible” description is insufficient.
2. Required component: Establish whether you need the adapter housing, Simplex plugs or a terminated fiber cable. ET 200 terminal blocks provide wiring bases for electronic modules and serve a different purpose.
3. Physical condition: Inspect the cover, retaining clips and connector seats for cracks or deformation. Avoid forcing the plugs into the housing. Check the cable’s permitted bend radius in its documentation; a closed cover alone does not prove correct cable routing.
4. Fault isolation: During a communication failure, examine station power as well as the optical connection. ET 200 power supply modules and the interface module’s supply are separate checks. Establish the cause before treating an adapter replacement as the solution.
5. Checks after replacement: With the machine in a safe state, verify station communication and diagnostics. Then check signals from the ET 200 digital input modules and the expected behaviour of the ET 200 digital output modules using the application’s commissioning procedure.
Editor’s Note
A common purchasing risk is confusing the adapter with the fiber plugs. Include photographs of the device label and existing connection with the enquiry. List the adapter housing, Simplex plugs and fiber cable separately. For opened packages, quantity and delivery contents matter just as much as the order number.
PDF manuals and assembly: Visit the Siemens ET 200 user manuals and PDF documentation page. For assembly, consult section 5.4.7, printed pages 88–91 of ET 200S Operating Instructions, A5E00515771-06. For package contents, refer to the Appendix A accessory list in IM151-1 FO STANDARD, A5E01075965-03.
Related Topics
Communication Interfaces · Connection Modules · About ET 200 · PDF Manuals
Otomasyon AVM
Siemens Main Menu · SIMATIC S7 · ET 200 Modules · ET 200 PDF Manuals · PLC and HMI