6ES7 151-7AA13-0AB0
Siemens 6ES7 151-7AA13-0AB0 ET 200S IM151-7 CPU
Siemens 6ES7 151-7AA13-0AB0 is the ET 200S IM151-7 CPU in the SIMATIC ET 200 family. It provides 96 KB of work memory and an MPI/PROFIBUS DP interface, executing the user program locally in the station. It supports stand-alone control or DP slave operation. The order number without spaces is 6ES7151-7AA13-0AB0.
Work memory and SIMATIC MMC
Of the 96 KB work memory, up to 64 KB is available for retentive data blocks. Load memory resides on a SIMATIC Micro Memory Card (MMC); a suitable MMC must be inserted for operation. Assess card capacity separately from CPU work memory. Review program size, data blocks and retentivity settings together when checking the project.
MPI and PROFIBUS communication
MPI is used for programming and communication connections, while PROFIBUS DP handles data exchange with a higher-level controller. The Siemens hardware list specifies send and receive support for direct data exchange. The PROFIBUS and PROFINET interfaces page provides related network information; select the connection according to this model’s MPI/DP hardware.
For an existing station, compare the MPI/PROFIBUS address, transmission rate, exchanged data areas and higher-level controller configuration. Inspect the connector, cable shielding and bus termination when investigating a connection fault. For general architecture information, see the Siemens ET 200 overview.
Station configuration with ET 200S modules
The Siemens hardware list specifies expansion with up to 63 ET 200S modules. The actual station design must also satisfy module compatibility, address space, power group and supply limits. Select digital input, digital output and analog input modules by their complete order numbers.
Check power supply modules, power distribution modules, terminal blocks and connection modules as parts of the station’s electrical and mechanical arrangement. Category links show general product groups; an item appearing under the ET 200 heading does not by itself establish compatibility.
STEP 7 and the hardware catalogue
Siemens product supplement A5E00860829-01 lists the 7AA13 model in the STEP 7 V5.4 SP1 hardware catalogue. For earlier versions, it specifies STEP 7 V5.2 SP1 or later with HSP 0107. Compare the selected order number and firmware in the hardware catalogue with the physical CPU and existing project.
Editor’s note: firmware upgrade limit
Siemens product information A5E01159154-01 states that earlier IM151-7 CPUs, including 6ES7151-7AA13-0AB0, cannot be upgraded to firmware V2.6. Do not apply an update intended for a later IM151-7 CPU solely because the family name matches. Hardware replacement and firmware updating are separate operations; assess a replacement against the project and installed module compatibility.
Maintenance and fault assessment
Before intervention, preserve the existing STEP 7 project, hardware configuration, MMC information and diagnostic records. Assess the CPU operating state separately from whether the higher-level controller can communicate with the station. Compare module order, power groups and programmed input/output addresses with the installed arrangement. Verify that the backup is usable before a memory reset or program download.
PDF files and user manuals
For PDF and user manual links, visit the Siemens ET 200 user manuals page. Assess this model using the IM151-7 CPU Manual A5E00058783-04 together with the 7AA13 product supplement A5E00860829-01. Refer to the relevant statement in product information A5E01159154-01 for the restriction between firmware generations.
Related topics
Explore counter modules, positioning modules, special input modules, special output modules, other network interfaces and additional modules for other station components. For safety architecture comparisons, see functional and safety modules, safety modules and PROFIsafe. The 7AA13 is a standard CPU model and must not be treated as an F-CPU.
ET 200 navigation
Simatic ET200 | About Siemens ET200 PLC | ET200 additional modules | ET200 Analog Input Modules
ET200 Connection Modules | ET200 Counter Modules | ET200 Digital input | ET200 Digital Output Modules
ET200 Functional and Safety Modules | ET200 Other Network Interface Modules | ET200 Positioning Modules | ET200 Power Distribution Modules
ET200 Power Supply Modules | ET200 PROFIBUS and PROFINET | ET200 Safety Modules | ET200 Special Input Modules
ET200 Special Output Modules | ET200 Terminal Blocks | Siemens ET200 ProfiSAFE | Siemens ET200 User Manuals