Siemens SIMOTICS / 1FW3

Siemens SIMOTICS / 1FW3 covers Siemens products through force or torque duty, mechanical size, measuring system, cooling and drive pairing. The period references are 12/2006.

Siemens SIMOTICS / 1FW3 supports maintenance, machine retrofit and new-axis selection. The drive forms one system with the motor winding, encoder protocol, command interface, brake and cable terminations.

For Siemens SIMOTICS / 1FW3, 1FK7 Synchronmotoren — Projektierungshandbuch PFK7S identifies the manual family used to locate generation and combination tables.

Siemens SIMOTICS / 1FW3 uses the electrical, mechanical and interface distinctions stated for this family as its connection profile. The engineering tool must match the drive generation and firmware.

1FW3 is a direct-drive torque motor for gearless rotary motion. Continuous/peak torque, inner and outer diameter, bearing arrangement, thermal monitoring and angular feedback follow a different selection path from a 1FN3 linear axis.

When building a Siemens SIMOTICS / 1FW3 axis, consider Siemens SIMOTICS / 1FN1, Siemens SIMOTICS / 1FN3 and Siemens SIMOTICS / 1FW6 within the same generation and supply class.

For Siemens SIMOTICS / 1FW3 command, feedback and maintenance, linear and torque motors, servo-drive families and compatible servomotors complete the system through matching ports, cable ends and software support.

Siemens SIMOTICS / 1FW3 family and model distinctions

1FW3: SIMOTICS / 1FW3 Komple tork motoru. Key distinctions include the electrical, mechanical and interface distinctions stated for this family. The applicable combination tables are identified under Komple tork motoru.

A shared enclosure or series name is insufficient when replacing Siemens SIMOTICS / 1FW3. Compare the complete nameplate sequence, supply voltage, capacity, motor-encoder generation, brake, connector and parameter-transfer path together.