Siemens SIMOTICS 1FK7 G2
Siemens SIMOTICS 1FK7 G2 covers Siemens products through frame, inertia, torque-speed behaviour, encoder, brake and compatible drive. The period references are 31.05.2017.
Siemens SIMOTICS 1FK7 G2 supports maintenance, machine retrofit and new-axis selection. The drive forms one system with the motor winding, encoder protocol, command interface, brake and cable terminations.
For Siemens SIMOTICS 1FK7 G2, SIMOTICS S-1FK7 G1 / G2 conversion and product-family table identifies the manual family used to locate generation and combination tables.
Siemens SIMOTICS 1FK7 G2 uses the electrical, mechanical and interface distinctions stated for this family as its connection profile. The engineering tool must match the drive generation and firmware.
When building a Siemens SIMOTICS 1FK7 G2 axis, consider Siemens SIMOTICS S-1FL6 Low Inertia, Siemens SIMOTICS S-1FL6 High Inertia and Siemens SIMOTICS S-1FK2 High Dynamic within the same generation and supply class.
For Siemens SIMOTICS 1FK7 G2 command, feedback and maintenance, Siemens SIMOTICS S-1FK2 Compact, Siemens SIMOTICS S-1FK7 Compact / G1 and Siemens SIMOTICS S-1FK7 High Dynamic / G1 complete the system through matching ports, cable ends and software support.
Siemens SIMOTICS 1FK7 G2 family and model distinctions
1FK7 G2 Compact: Siemens SIMOTICS 1FK7 G2. Key distinctions include the electrical, mechanical and interface distinctions stated for this family. Confirm wiring, feedback and system compatibility against the complete catalog number.
1FK7 G2 High Dynamic: Siemens SIMOTICS 1FK7 G2. Key distinctions include encoder feedback. Confirm wiring, feedback and system compatibility against the complete catalog number.
A shared enclosure or series name is insufficient when replacing Siemens SIMOTICS 1FK7 G2. Compare the complete nameplate sequence, supply voltage, capacity, motor-encoder generation, brake, connector and parameter-transfer path together.