6ES5 941-7UA12

Siemens 6ES5 941-7UA12 – S5-115U CPU 941, 2 KB RAM

Siemens 6ES5 941-7UA12 is a CPU 941 central processing unit for the S5-115U in the SIMATIC S5 family. This A-series S5 processor provides 2 KB of internal program RAM and one serial TTY connection. It executes the user program, processes input data and generates output commands.

CPU 941 is used for smaller programs and basic machine-control tasks. When selecting a replacement, check the 7UA12 suffix, operating system version and fitted memory submodule together. The 2 KB internal capacity must be distinguished from the total capacity available with suitable external memory.

Internal RAM and memory expansion

The Siemens A-CPU manual specifies 2 × 1024 bytes of internal RAM and a compatible 8 KB or 16 KB memory submodule for CPU 941. Internal memory combined with a suitable 16 KB submodule provides up to 18 KB of program memory. This maximum requires the additional memory hardware.

In the CPU 941/942/943 family, memory submodules extend the internal RAM. Select the RAM, EPROM or EEPROM type and capacity against the existing project. Check the current RAM program and the submodule contents separately. Establish through the PG where the program blocks are stored.

Single TTY port and SINEC L1

The serial connection supports a PG programmer or OP operator panel. With the appropriate configuration, the same connection can operate as a SINEC L1 slave. Select the programming cable, interface converter and operator panel for the existing TTY connection.

Record the port assignment and connected equipment when assessing communication hardware. The second serial port and additional communication functions offered by some CPU 943/944 versions must not be assigned to the 941-7UA12.

STEP 5 program, timers and counters

CPU 941 supports cyclic and interrupt-driven execution in the STEP 5 programming environment. Check the programming software, project files and blocks against the CPU 941 instruction set and supported organization blocks.

The A-CPU comparison table specifies 2048 flag bits, 128 timers and 128 counters for CPU 941. Check retention settings together with the backup battery. The availability of timers does not imply support for every time-controlled OB function provided by other CPU models.

Addressing and rack installation

Install the CPU in the CPU position of a suitable S5-115U rack. Compare the power supply and installed modules with the hardware list. Verify digital input, digital output and analog module addresses against the module settings and PLC program.

The Siemens A-CPU table lists CPU 941 digital process-image addresses as E 0.0–E 63.7 and A 0.0–A 63.7. Its footnote specifies that the combined number of digital inputs and outputs must not exceed 512. E/A is the German STEP 5 notation; the programming software may display I/Q in English.

Nearby order-number comparison

6ES5 941-7UA11, 6ES5 941-7UA13, 6ES5 941-7UB11 and 6ES5 942-7UA11 represent different versions or CPU options. Review the program, memory submodule, operating system and connected hardware together, especially when moving between A and B series. A similar model name alone does not confirm replacement compatibility.

Editor’s Note

When buying a used Siemens CPU, check the complete 941-7UA12 label. Inspect the front cover, memory receptacle, serial connector and signs of previous repair. Establish the exact version before selecting a spare.

Before removing a working CPU, back up the program and data blocks. Record the fitted memory submodule’s code and type. Changes made to RAM during the machine’s service life may not be present in an older EPROM.

If the PG cannot connect, check the TTY cable, converter and assigned port function. Inspect the connector if moving the cable changes the fault. Establish a working connection before deciding that the program is missing or the CPU has failed.

Include battery and power-supply checks when maintaining the S5 system. Switch off rack power before removing or inserting the CPU, and secure a backup before battery or memory work. Diagnose the fault before considering an overall reset.

After replacement, check diagnostics, program blocks and I/O addresses through the PG. Complete a controlled machine test and verify output functions. Record the CPU version, memory submodule, backup filename and changes for the next technician.

OtomasyonAVM resources

+ 6ES5 941-7UA12 model page · Siemens S5 second-hand models · S5-115 series PDF files · S5 memory cards.

Related topics

+ 6ES5 941-7UA11 · 6ES5 941-7UA13 · 6ES5 941-7UB11 · 6ES5 942-7UA11. These links support version and capacity comparison; they do not guarantee direct replacement compatibility.

Browse SIMATIC S5

+ SIMATIC S5 CPU models · S5 racks · S5 power supplies · S5 cables and connectors · Siemens second-hand main page.

Siemens and external references

+ Siemens S5-115U A-CPU manual, German. 6ES5 998-0UF12 / GWA 4NEB 811 6000-01b; section 2.2.2: memory submodules; printed pages 2-16 and 2-18: CPU 941 memory and operating features; 4-4: SI 1 functions; section 5.3: addressing.