6ES5 710-0AA11

Siemens 6ES5 710-0AA11 – Mounting Rack for Eight S5-110A I/O Modules

6ES5 710-0AA11 is a mounting rack for eight I/O modules in the S5-110A system of the SIMATIC S5 range. The Siemens S5-110A spare-parts note explicitly identifies this earlier rack as having coding beginning with “1”. Check that coding arrangement as well as the eight-module capacity when selecting a replacement.

The rack supports the installed digital input modules and digital output modules. Suitable socket bases and the bus connection link the modules to the CPU and system supply. Eight module positions do not mean eight signal channels; the installed cards determine the signal count.

AA11 coding and related racks

Preserve the earlier AA11 coding that begins with 1 when checking the bases and existing program. 6ES5 710-0SA11 also belongs to the short, eight-I/O-module rack group. Equal capacity does not remove the need to check base coding and address allocation. Record the original position markings before dismantling.

6ES5 710-0AA41 is the longer, 16-I/O-module option in the earlier AA series. 6ES5 710-0SA41 belongs to the long, 16-module rack group. Compare installation space, base count, coding and connecting cable together when considering short and long racks.

Mounting, sockets and bus connection

The modules engage with socket bases on the mounting assembly. When checking S5 cables and connectors, inspect the socket latches, contact surfaces and bus orientation as well as general appearance. The metal mounting arrangement also needs the appropriate grounding connection for the cabinet design.

If several modules fail intermittently together, investigate the bus and shared connections. Electromagnetic interference, a loose socket and an S5 power-supply fault can produce similar symptoms. Keep field power and internal system power distinct when tracing a replacement installation.

Installed modules and address allocation

The S5-110A manual lists 6ES5 400-7AA13 as 24 V DC, 6ES5 401-7AA13 as 24 V DC with a group signal, and 6ES5 405-7AB11 as 115 V AC/DC. Determine signal voltage from each card’s full order number, rather than from the rack model.

During PLC programming, compare the input/output addresses with base coding and physical module order. Do not determine an operating PLC address simply by counting modules from the left. The coding beginning with 1 on this rack deserves particular attention.

Similar housings appear in the S5 module directory. Before buying, check the rack, socket bases, bus cable and mounting hardware separately. Do not assume that modules or accessories visible in a photograph are included in the offered assembly.

Editor’s note

Start with the label and position markings. When selecting a Siemens S5 spare, rack length alone is insufficient to distinguish AA11 from SA11. Coding that begins with 1 is an important detail when addresses do not match expectations after replacement.

Do not dismiss an empty rack as trouble-free because it has no circuit board installed. Look for oxidation, bent contacts and heat marks. If using a suitable multimeter for continuity checks, isolate the supply and follow the circuit documentation instead of probing sockets at random.

If a serviceable module fails in one particular position, include that rack position in PLC troubleshooting. Check the module, base and bus connection in sequence. Keep a record of the address arrangement during testing so that the checks remain easy to interpret.

For a used assembly, request photographs showing all eight module positions. A missing base, damaged latch or distorted mounting rail can be hidden by a single camera angle. The socket must provide reliable electrical contact as well as physically retaining the module.

Photograph bus orientation, module order and grounding before dismantling. Preserve labels and markings that document the original coding during cleaning. Comparing the old rack’s dimensions and fixing points also helps avoid installation problems when the replacement arrives.

OtomasyonAVM resources and PDFs

See About Siemens S5 PLC and S5 mounting racks for the related system groups.

+ OtomasyonAVM shared S5 PDF and manual archive. The earlier coding arrangement is documented in the spare-parts footnote of the English S5-110A manual below.

Related topics

+ 6ES5 710-0SA11: short rack for eight I/O modules; compare coding and connections.

+ 6ES5 710-0AA41: long rack for 16 I/O modules in the earlier AA series.

+ 6ES5 710-0SA41: long rack for 16 I/O modules.

+ S5 cables and connectors: bus and system connections.

Browse SIMATIC S5

+ S5 mounting racks · S5 90/110 module directory · SIMATIC S5 · Siemens S5 PLC · Siemens second-hand equipment

Siemens and external references

+ Siemens S5-110A Operating Instructions — GWA 4NEB 807 0690-02 / 6ES5 998-0AA22, English manufacturer document hosted by ADEGIS. Printed 6.1 / PDF 37: rack options and the footnote naming the exact 710-0AA11 code with coding beginning at 1.

+ Same Siemens manual — Section 2.4, printed 2.3 / PDF 22: module engagement with the socket bases and bus connection to the CPU and supply. Section 2.5, printed 2.6 / PDF 25: system wiring.