Schneider Electric Lexium 32i / BMI

Schneider Electric Lexium 32i / BMI belongs to motion-control or integrated-drive hardware. The 7 technical references or proven groups below are separated by real differences in the complete order code.

Do not stop at the frame or family prefix. Confirm supply, I/O or interface role, feedback, software/firmware and connected-equipment class against the complete reference.

Shared family context: Integrated motor and power stage; SinCos Hiperface feedback. 70 mm flange; 1.13 kg·cm² rotor inertia. 70 mm flange; 1.67 kg·cm² rotor inertia. 100 mm flange; 6.28 kg·cm² rotor inertia.

Motion-control differences

BMI702T — 2.2 Nm nominal torque at 1,700 rpm; 0.4 kW at the 115 V single-phase operating point.

BMI703T — 2.9 Nm nominal torque at 1,400 rpm; 0.4 kW at the 115 V single-phase operating point.

BMI1002T — 5.4 Nm nominal torque at 1,400 rpm; 0.75 kW at the 115 V single-phase operating point.

BMI702P — 2.4 Nm nominal torque at 1,800 rpm; 0.4 kW at the 208 V three-phase operating point.

BMI703P — 2.9 Nm nominal torque at 1,600 rpm; 0.45 kW at the 208 V three-phase operating point.

BMI1002P — 5.4 Nm nominal torque at 1,900 rpm; 1 kW at the 208 V three-phase operating point.

BMI1003P — 100 mm flange; 9.37 kg·cm² rotor inertia. 7.2 Nm nominal torque at 1,500 rpm; 1 kW at the 208 V three-phase operating point.

Manual and related-product path: Telemecanique Motion Control Manuals · Telemecanique Motion Control Systems.

Before replacement or ordering, check the complete label, electrical class, connector/terminal arrangement and project backup together. A similar name or enclosure alone does not prove compatibility.