Schneider Electric BMH
Schneider Electric BMH belongs to servo-motor hardware. The 18 technical references or proven groups below are separated by real differences in the complete order code.
Do not stop at the frame or family prefix. Confirm supply, I/O or interface role, feedback, software/firmware and connected-equipment class against the complete reference.
Shared family context: P winding class with Lexium 32 drive pairing; the full suffix defines shaft, SinCos Hiperface encoder, brake, protection and connector. T winding class with Lexium 32 drive pairing; the full suffix defines shaft, SinCos Hiperface encoder, brake, protection and connector. 70 mm flange, stack length 2; medium-inertia BMH. 2.5 Nm continuous and 7.4 Nm peak torque; 8,000 rpm maximum mechanical speed. 70 mm flange, stack length 3; medium-inertia BMH. 3.4 Nm continuous and 10.2 Nm peak torque; 8,000 rpm maximum mechanical speed. The complete suffix defines shaft, SinCos Hiperface encoder, brake, protection and connector selection. Confirm flange, winding and drive pairing in the BMH/BSH selection table.
Motor differences
BMH0701P — 70 mm flange, stack length 1; medium-inertia BMH. 1.2 Nm continuous and 4.2 Nm peak torque; 8,000 rpm maximum mechanical speed.
BMH0701T — 70 mm flange, stack length 1; medium-inertia BMH. 1.4 Nm continuous and 4 Nm peak torque; 8,000 rpm maximum mechanical speed.
BMH0702T —
BMH0702P —
BMH0703T —
BMH0703P —
BMH1001P — 100 mm flange, stack length 1; medium-inertia BMH. 3.3 Nm continuous and 10.8 Nm peak torque; 6,000 rpm maximum mechanical speed.
BMH1001T — 100 mm flange, stack length 1; medium-inertia BMH. 3.4 Nm continuous and 10.8 Nm peak torque; 6,000 rpm maximum mechanical speed.
BMH1002T — 100 mm flange, stack length 2; medium-inertia BMH. 6 Nm continuous and 18.4 Nm peak torque; 6,000 rpm maximum mechanical speed.
BMH1002P — 100 mm flange, stack length 2; medium-inertia BMH. 5.9 Nm continuous and 18.4 Nm peak torque; 6,000 rpm maximum mechanical speed.
BMH1003T — 100 mm flange, stack length 3; medium-inertia BMH. 8 Nm continuous and 23.5 Nm peak torque; 5,000 rpm maximum mechanical speed.
BMH1003P — 100 mm flange, stack length 3; medium-inertia BMH. 8.4 Nm continuous and 25.1 Nm peak torque; 5,000 rpm maximum mechanical speed.
BMH1401P — 140 mm flange, stack length 1; medium-inertia BMH. 10.3 Nm continuous and 30.8 Nm peak torque; 4,000 rpm maximum mechanical speed.
BMH1402P — 140 mm flange, stack length 2; medium-inertia BMH. 18.5 Nm continuous and 50.3 Nm peak torque; 4,000 rpm maximum mechanical speed.
BMH1403P — 140 mm flange, stack length 3; medium-inertia BMH. 24 Nm continuous and 71.8 Nm peak torque; 4,000 rpm maximum mechanical speed.
BMH2051P — 205 mm flange, stack length 1; medium-inertia BMH. 34.4 Nm stall torque and 71.4 kg·cm² rotor inertia without brake.
BMH2052P — 205 mm flange, stack length 2; medium-inertia BMH. 62.5 Nm stall torque and 129 kg·cm² rotor inertia without brake.
BMH2053P — 205 mm flange, stack length 3; medium-inertia BMH. 88 Nm continuous and 266 Nm peak torque; 3,800 rpm maximum mechanical speed.
Manual and related-product path: Telemecanique Servo Motors · Schneider Electric Lexium 32C · Schneider Electric Lexium 32A.
Before replacement or ordering, check the complete label, electrical class, connector/terminal arrangement and project backup together. A similar name or enclosure alone does not prove compatibility.