6ES7322-1HF10-0AA0
Siemens 6ES7322-1HF10-0AA0 – SM322 Digital Module with 8 Relay Outputs
6ES7322-1HF10-0AA0 is a Siemens SIMATIC S7-300 SM322 digital output module with 8 relay outputs. Its nominal product rating is 24 V DC / 5 A or 230 V AC / 5 A. When selecting S7-300 digital output modules, consider AC/DC load type, switching current, operating frequency, front connector and contact condition.
Relay operation and separate supply requirements
The module converts commands from the S7-300 CPU into relay switching. Outputs are electrically isolated in groups of one channel. The switched load receives power from an external circuit; a dry contact does not generate a supply voltage.
The relay coils require a nominal 24 V DC supply. Keep this requirement separate from the AC or DC voltage switched by the contacts. Check the cabinet power supply, L+ and M connections and load circuits against the electrical drawings.
Understanding the 5 A rating
The nominal 5 A rating does not apply equally to every load. Siemens' inductive-load table lists 2 A at 24 V DC and 3 A at 230 V AC. For contactor coils or solenoid valves, assess voltage, load category, pickup current and required contact life together.
There is no internal short-circuit protection; external protection is required. Paralleling outputs to increase current capacity is not supported. Assess suitable suppression for inductive loads. Frequent operation causes mechanical contact wear, so select an appropriate output technology for high-speed pulse or PWM applications.
40-pin front connector and wiring checks
The module requires one 40-pin front connector. Siemens specifies spring-terminal connectors from 6ES7392-1BM01-0AA0 onward. Confirm connector compatibility, terminal assignments, conductor sizing and any supply bridges against the wiring diagram for this exact module.
Do not assume the front connector is included. For a used replacement, inspect the latch, terminal tightness and signs of overheating. With power disconnected, compare existing wiring with the replacement module's order number and connection diagram.
Status indication and system verification
Each channel has a green status LED; the module provides no diagnostic or interrupt functions. An illuminated LED does not prove satisfactory contact conduction under load. Compare the output command in the PLC program with measurements at the equipment.
Where machine operation needs confirmation, use suitable feedback through digital inputs. Distinguish a command indication on the HMI from verified operating status.
Assessing a used module
When assessing used Siemens equipment, test all eight outputs individually under a suitable load. Check for welded contacts, intermittent conduction, abnormal contact voltage drop and terminal heating. Hearing a relay click is not a sufficient functional test.
Review the nameplate photograph, test results and supplied accessories before purchase. Confirm availability, price and any warranty terms for the actual unit being offered.
Related topics and product groups
S7-300 overview | S7-300 CPU modules | Digital input modules
Digital output modules | Function modules | Analog module range
Used Siemens products | Used equipment overview | OtomasyonAVM home
Manufacturer references
Siemens – 6ES7322-1HF10-0AA0 product information | Siemens – technical data sheet (archived copy) | Siemens – S7-300 module manual, section 3.31 (archived copy)