6ES7321-1FF00-0AA0
6ES7321-1FF00-0AA0 Siemens SM 321 8-Channel 120/230 V AC Digital Input Module
6ES7321-1FF00-0AA0 is an SM 321 module in the Siemens SIMATIC S7-300 family, providing 8 digital inputs, a 120/230 V AC input rating and optical isolation. Field wiring uses a 20-pin front connector. When selecting this module to read AC control signals in an existing PLC system, verify both the complete order number and the field voltage.
AC input signals and application
The module transfers on/off states from suitable AC control circuits to the PLC. Applications can include monitoring AC signals switched by pushbuttons, limit switches or auxiliary contacts. 120/230 V AC identifies the nominal input signal voltage; it does not describe a power output for a connected load. Do not assume the same input arrangement is suitable for a 24 V DC sensor.
20-pin connection and installation checks
Compare the front connector terminal markings with the wiring diagram on the module cover and the cabinet drawings. A 20-pin connector does not establish identical pin assignments across different SM 321 models. When replacing digital input modules, check common terminals and field wiring separately. Disconnect the AC field circuit and verify that it is de-energized before working on its connections.
FF00, FF01 and FF10 model differences
The Siemens SIMOTION I/O list identifies 6ES7321-1FF01-0AA0 as the successor to 6ES7321-1FF00-0AA0. This does not establish replacement without configuration checks in every project. 6ES7321-1FF10-0AA0 is a separate model with a 40-pin connection. Compare the hardware configuration, wiring arrangement and versions supported by the installed station.
Checks when buying a used module
Match the 6ES7321-1FF00-0AA0 label and hardware version against the existing unit. Inspect connector contacts, the housing and signs of overheating. Request test information showing that all eight inputs respond correctly when suitable signals are applied and removed using an appropriate test setup. Check the input states read by the CPU as well as the indicators. Confirm whether the front connector and covers are included in the delivery.
PDF files and manufacturer sources
Check documents in the S7-300 PDF files section against the complete order number. Use the Siemens product record for basic identification and the Siemens SIMOTION module list for the successor relationship. The restriction on replacement during operation appears on page 8-10 of the archived Siemens ET 200M manual. Do not use FF01 or FF10 specifications as the FF00 data sheet.
Related topics and navigation
S7-300 main page | Digital input modules | Digital output modules | S7-300 CPU modules
Analog modules | Special and function modules | S7-300 PDF files | S7-300 memory cards
Siemens SIMATIC S7 | Siemens S7 PLC range | Used Siemens products | PLCs and accessories
HMI operator panels | PLC and HMI | Second-hand main page | OtomasyonAVM home